Day: September 28, 2021

Some common heterocyclic compound, 35691-93-1, name is Ethyl 3,5-dimethyl-1H-pyrazole-4-carboxylate, molecular formula is C8H12N2O2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Computed Properties of C8H12N2O2

A microwave vial was charged with ethyl 3,5-dimethyl-1 H-pyrazole-4-carboxylate (1.00 g, 5.95 mmol), methyl vinyl sulfone (0.521 ml, 5.95 mmol), K2CO3 (2.465 g, 17.84 mmol) and DMF (15 ml), and the mixture was irradiated for 30 minutes at 135 C in a personal microwave reactor. The reaction mixture was diluted with EtOAc, washed with brine and dried over magnesium sulfate. The solvent was removed to give ethyl 3,5-dimethyl-1-[2-(methylsulfonyl)ethyl]-1 H-pyrazole-4-carboxylate (1.61 g, 99 % yield). 1 H NMR (400 MHz, CHLOROFORM-d) delta ppm 4.47 (t, J=6.2 Hz, 2 H), 4.30 (q, J=IA Hz, 2 H), 3.65 (t, J=6.2 Hz, 2 H), 2.61 (s, 3 H), 2.60 (s, 3 H), 2.42 (s, 3 H), 1.37 (t, J=IA Hz, 3 H).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 35691-93-1, its application will become more common.

Reference:
Patent; SMITHKLINE BEECHAM CORPORATION; WO2008/157273; (2008); A1;,
Pyrazole – Wikipedia,
Pyrazoles – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 33064-36-7, name is 1H-Pyrazole-3-carboxamide, A new synthetic method of this compound is introduced below., Application In Synthesis of 1H-Pyrazole-3-carboxamide

A mixture of feri-butyl 4-(10-bromo-2-oxo-l,2-dihydropyrimido[l,2-b]indazol-4-yl)piperidine-l- carboxylate (200 mg, 0.45 mmol), lH-pyrazole-3-carboxamide (124 mg, 1.12 mmol), tripotassium phosphate (133 mg, 0.63 mmol), [(2-di-ieri-butylphosphino-3,6-dimethoxy-2′,4′,6′-triisopropyl-l, – biphenyl)-2-(2 ‘-amino- l,l’-biphenyl)]palladium(II) methanesulfonate (= tBuBrettPhos Pd G3) (23 mg, 0.027 mmol), 2-(di-ieri-butylphosphino)-2′,4′,6′- triisopropyl-3,6-dimethoxy-l,l ‘-biphenyl (= tBuBrettPhos) (13 mg, 0.027 mmol) was added to a flask and flushed with argon before being suspended in 2 ml of ieri-butanol. Argon was bubbled for Imin more through the suspension, which was then stirred overnight at 110 C. After cooling to RT, the mixture was filtered and purified by preparative HPLC (gradient acetonitrile/water with 0.1 % trifluoroacetic acid). Evaporation of the combined product fractions yielded the title compound (119 mg, 56% of theory). LC-MS (Method 2): Rt = 2.73 min, MS (ESINeg): m/z = 476 [M-H]”

The synthetic route of 33064-36-7 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; BAYER PHARMA AKTIENGESELLSCHAFT; ELLERMANN, Manuel; VALOT, Gaelle; CANCHO GRANDE, Yolanda; HASSFELD, Jorma; KINZEL, Tom; KOeBBERLING, Johannes; BEYER, Kristin; ROeHRIG, Susanne; SPERZEL, Michael; STAMPFUSS, Jan; MEYER, Imke; KOeLLNBERGER, Maria; BURKHARDT, Nils; SCHLEMMER, Karl-Heinz; STEGMANN, Christian; SCHUHMACHER, Joachim; WERNER, Matthias; (308 pag.)WO2016/173948; (2016); A1;,
Pyrazole – Wikipedia,
Pyrazoles – an overview | ScienceDirect Topics

Synthetic Route of 31108-57-3, Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 31108-57-3, name is 1H-Pyrazole-4-carbonitrile, This compound has unique chemical properties. The synthetic route is as follows.

Synthesis of II-A13b To a solution of II-A12b (200 mg, 0.5 mmol) in acetone (3 mL) was added 4-cyanopyrazole (69.9 mg, 0.8 mmol) and K2C03 (345 mg, 2.5 mmol). The mixture was stirred at 25C for 16 hrs. To the mixture was added water (20 mL) and the mixture was extracted with EtOAc (2 x 20 mL). The organic layer was separated, concentrated and purified by flash column (0781) (25-60% EtOAc in PE) to give II-A13b (100 mg). The material (100 mg) was purified by HPLC separation to give II-A13b (4 mg, 2%) as a solid. (0782) 1H NMR (400 MHz, CDCf) dH 7.85-7.80 (m, 2H), 5.38-5.09 (m, 2H), 4.05 (t, J =1.6 Hz, 1H), 3.98 (s, 1H), 3.67 (dd, J= 8.0, 12.0 Hz, 1H), 1.95-1.66 (m, 7H), 1.52-1.37 (m, 8H), 1.35-1.19 (m, 7H), 1.17-1.00 (m, 1H), 0.86 (s, 3H); LC-ELSD/MS purity 99%, MS ESI calcd. for C^^NsOs [M +H]+ 412.2, found 412.2.

The chemical industry reduces the impact on the environment during synthesis 1H-Pyrazole-4-carbonitrile. I believe this compound will play a more active role in future production and life.

Reference:
Patent; SAGE THERAPEUTICS, INC.; ROBICHAUD, Albert, Jean; SALITURO, Francesco, G.; BLANCO-PILLADO, Maria, Jesus; LA, Daniel; HARRISON, Boyd, L.; (206 pag.)WO2019/140272; (2019); A1;,
Pyrazole – Wikipedia,
Pyrazoles – an overview | ScienceDirect Topics

Synthetic Route of 175137-46-9, These common heterocyclic compound, 175137-46-9, name is 5-Cyclopropyl-1H-pyrazol-3-amine, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a solution of 2,4-difluoro-5-nitrobenzonitrile (Method 9, 5.0 g, 27 mmol) and DIEA (5.4 ml, 31 mmol) in THF (20 ml) was added dropwise the solution of 5-cyclopropyl- 1H-pyrazol-3-amine (3.2 g, 26 mmol) in THF (5 ml) at 0 C. After addition, the reaction mixture was stirred at 25 C for 1 hr. The solvent was removed under reduced pressure and the resulted residue was purified by column chromatography (hexane : EtOAc = 3 : 1) to give the title compound as a yellow solid (5.5 g, 74%). NMR (400 MHz) 12.54 (s, 1H), 10.13 (s, 1H), 8.78 (d, J= 7.2 Hz, 1H), 8.10 (d, J= 13.6 Hz, 1H), 6.02 (s, 1H), 1.91 (m, 1H), 0.97 (m, 2H), 0.72 (m, 2H). MS: Calcd. : 287; Found: [M+H]+ 288.

Statistics shows that 5-Cyclopropyl-1H-pyrazol-3-amine is playing an increasingly important role. we look forward to future research findings about 175137-46-9.

Reference:
Patent; ASTRAZENECA AB; ASTRAZENECA UK LIMITED; WO2005/103010; (2005); A2;,
Pyrazole – Wikipedia,
Pyrazoles – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 82560-12-1, name is 3-Amino-5-tert-butylpyrazole, belongs to pyrazoles-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 82560-12-1, SDS of cas: 82560-12-1

To a solution of methyl-4-iodo-2-methoxybenzoate (10.0 g, 34.2 mmol) in toluene (90 mL) was added 3-tert-butyl-1H-pyrazol-5-amine (5.24 g, 37.7 mmol) followed by (1R,2R)-N1,N2-dimethylcyclohexane-1,2-diamine (870 mg, 1.08 mL, 6.85 mmol) and potassium carbonate (14.9 g, 108 mmol). The mixture was purged with N2, copper(I) iodide (326 mg, 1.71 mmol) was added and the reaction mixture was heated at reflux under N2 for 18 hr. The mixture was cooled to RT and was partitioned between EtOAc (100 mL) and water (3×150 mL). The organic layer was separated and washed with aq. citric acid solution (1% w/v, 150 mL) followed by water (150 mL), and was then dried and evaporated in vacuo. The residue was purified by flash column chromatography (SiO2, 330 g, EtOAc in isohexane, 0-100%, gradient elution) to afford methyl 4-(5-amino-3-tert-butyl-1H-pyrazol-1-yl)-2-methoxybenzoate as a buff coloured solid (3.62 g, 35%); Rt 1.93 min (Method 2); m/z 304 (M+H)+ (ES+).

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; King-Underwood, John; Hardy, George; Murray, Peter John; Williams, Jonathan Gareth; Onions, Stuart Thomas; US2013/29990; (2013); A1;,
Pyrazole – Wikipedia,
Pyrazoles – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 17635-44-8, name is 3,4,5-Tribromopyrazole, belongs to pyrazoles-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 17635-44-8, SDS of cas: 17635-44-8

EXAMPLE 40 Preparation of 3,4,5-Tribromopyrazole-1-ethanol acetate (ester) A quantity (3.04 g., 0.01 mole) of 3,4,5-tribromopyrazole was dissolved in 70 ml. acetone and 2.76 g. (0.02 mole) solid anhydrous potassium carbonate was added. The mixture was heated at the reflux temperature with stirring for 10 minutes and after cooling, 1.85 g. (0.011 mole) of 2-bromoethyl acetate was added. This reaction mixture was heated at the reflux temperature for 12 hrs. cooled, filtered, and the acetone removed under reduced pressure. The resultant oil consisted of a mixture of the desired acetate and the corresponding alcohol. The mixture was dissolved in pyridine (15 ml.) and treated with acetic anhydride (3.06 g., 0.03 mole) at 0 C. This reaction mixture was kept at about 25 C. overnight, and then poured into 200 ml. of ice water. The precipitate that formed was collected on a filter, and washed with water. After drying and recrystallizing from hexane there was obtained 3,4,5-tribromopyrazole-1-ethanol acetate (ester) having a melting point at 64 to 67 C. Analysis: Calc’d. for C7 H7 Br3 N2 O2: C, 21.51; H, 1.81; N, 7.17; Br, 61.33. Found: C, 21.88; H, 1.95; N, 7.14; Br, 61.42.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; The Upjohn Company; US4084955; (1978); A;,
Pyrazole – Wikipedia,
Pyrazoles – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 41680-34-6, name is 3-Amino-1H-pyrazole-4-carboxylic acid, A new synthetic method of this compound is introduced below., Application In Synthesis of 3-Amino-1H-pyrazole-4-carboxylic acid

A solution of 5-amino-1H-pyrazole-4-carboxylic acid (2000 mg, 15.74 mmol) and (E)-3- (dimethylamino)-2-methylacrylaldehyde (1780 mg, 15.74 mmol) in acetic acid (3 mL) and ethanol (1 mL) was heated at 70 oC for 1h. The resulting mixture was cooled to room temperature and the solid was collected by filtration, washed with water and dried in vacuum to afford 6-methylpyrazolo[1,5-a]pyrimidine-3-carboxylic acid (1610 mg, 58%) as a white solid. MS (ESI): m/z = 178.1 [M+1]+.

The synthetic route of 41680-34-6 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; F. HOFFMANN-LA ROCHE AG; GENENTECH, INC.; BRYAN, Marian, C.; GOBBI, Alberto; KIEFER, James, Richard, Jr.; KOLESNIKOV, Aleksandr; OLIVERO, Alan, G.; DROBNICK, Joy; LIANG, Jun; RAJAPAKSA, Naomi; (846 pag.)WO2017/108723; (2017); A2;,
Pyrazole – Wikipedia,
Pyrazoles – an overview | ScienceDirect Topics

Reference of 31108-57-3, The chemical industry reduces the impact on the environment during synthesis 31108-57-3, name is 1H-Pyrazole-4-carbonitrile, I believe this compound will play a more active role in future production and life.

To a solution of IV-B8 (44 mg, 0.11 mmol) in acetone (2 mL) was added lH-pyrazole-4- carbonitrile (16 mg, 0.17 mmol) and K2C03 (48 mg, 0.34 mmol). After stirring at 25C for 12 h, the mixture was diluted with water (5 mL) and extracted with EtOAc (2 x 10 mL). The combined organic solution was washed with brine (5 mL), dried over anhydrous Na2S04, filtered and concentrated. The residue was purified by flash column (0-43% of EtOAc in PE) to give IV-B9 (22 mg, 49%) as a solid. (3084) 1HNMR (400 MHz, CDCl3) dH 7.86 (s, 1H), 7.81 (s, 1H), 5.08-5.02 (m, 1H), 4.94-4.87 (m, 1H), 2.63 (t, j= 8.8 Hz, 1H), 2.26-2.16 (m, 1H), 2.06-1.99 (m, 1H), 1.82-1.70 (m, 6H), 1.46- 1.17 (m, 15H), 0.91-0.83 (m, 2H), 0.65 (s, 3H). LC-ELSD/MS purity 99%, MS ESI calcd. for C24H33N302 [M+H]+396.2, found 396.2

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 1H-Pyrazole-4-carbonitrile, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; SAGE THERAPEUTICS, INC.; ROBICHAUD, Albert, Jean; SALITURO, Francesco, G.; BLANCO-PILLADO, Maria, Jesus; LA, Daniel; HARRISON, Boyd, L.; (646 pag.)WO2019/126761; (2019); A1;,
Pyrazole – Wikipedia,
Pyrazoles – an overview | ScienceDirect Topics

82560-12-1, name is 3-Amino-5-tert-butylpyrazole, belongs to pyrazoles-derivatives compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. Recommanded Product: 82560-12-1

To a solution of 5-amino-3-tert-butylpyrazole (3.93 g, 28.2 mmol) in CH2Cl2 (140 mL) was added di-tert-butyl dicarbonate (6.22 g, 28.5 mmol) in one portion. The resulting solution was stirred at room temp. for 13 h, then diluted with EtOAc (500 mL). The organic layer was washed with water (2 x 300 mL), dried (MgSO4) and concentrated under reduced pressure. The solid residue was triturated (100 mL hexane) to give the desired carbamate (6.26 g, 92%): mp 63-64 C; TLC Rf (5% acetone/95% CH2Cl2); 1H-NMR (DMSO-d6) delta 1.15 (s, 9H), 1.54 (s, 9H), 5.22 (s, 1H), 6.11 (s, 2H); FAB-MS m/z ((M+H)+).

The synthetic route of 82560-12-1 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Bayer Pharmaceuticals Corp.; EP1047418; (2005); B1;,
Pyrazole – Wikipedia,
Pyrazoles – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 3994-50-1, name is 1-Methyl-4-nitro-1H-pyrazole, belongs to pyrazoles-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 3994-50-1, HPLC of Formula: C4H5N3O2

A mixture of a portion (0.7 g) of the material so obtained, platinum oxide (0.05 g), ethyl acetate (5 ml) and ethanol (15 ml) was stirred under 3 atmospheres pressure of hydrogen for 2 hours. The catalyst was removed by filtration and the filtrate was evaporated. There was thus obtained the required starting material (0.6 g); 1H NMR: (DMSOd6) 3.64 (s, 3H), 6.86 (s, IH), 6.97 (s, IH).

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; ASTRAZENECA AB; ASTRAZENECA UK LIMITED; WO2006/40520; (2006); A1;,
Pyrazole – Wikipedia,
Pyrazoles – an overview | ScienceDirect Topics