Gerard, Anne-Laure et al. published their research in Tetrahedron Letters in 2006 | CAS: 45887-08-9

3-(1H-Pyrazol-3-yl)pyridine (cas: 45887-08-9) belongs to pyrazole derivatives. Pyrazole has two ring nitrogen atoms in which N1 is pyrrolic and N2 is pyridine-like. The N1 nitrogen is not reactive but is deprotonated in the presence of a base-forming anion. Pyrazoles are commonly used scaffold molecules in drug discovery projects. The use of pyrazole derivatives is based on their analgesic, anti-inflammatory, antipyretic, antiarrhythmic, sedative, muscle relaxant, neuroleptic, anticonvulsant, monoamine oxidase inhibitory, antidiabetic and antibacterial activities.Recommanded Product: 45887-08-9

Efficient and simple synthesis of 3-aryl-1H-pyrazoles was written by Gerard, Anne-Laure;Bouillon, Alexandre;Mahatsekake, Clement;Collot, Valerie;Rault, Sylvain. And the article was included in Tetrahedron Letters in 2006.Recommanded Product: 45887-08-9 This article mentions the following:

Efficient preparation of 3-aryl-1H-pyrazoles by coupling of 1-protected 5-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)-1H-pyrazoles with (het)aryl halides is described. The choice of THP protecting group is discussed. In the experiment, the researchers used many compounds, for example, 3-(1H-Pyrazol-3-yl)pyridine (cas: 45887-08-9Recommanded Product: 45887-08-9).

3-(1H-Pyrazol-3-yl)pyridine (cas: 45887-08-9) belongs to pyrazole derivatives. Pyrazole has two ring nitrogen atoms in which N1 is pyrrolic and N2 is pyridine-like. The N1 nitrogen is not reactive but is deprotonated in the presence of a base-forming anion. Pyrazoles are commonly used scaffold molecules in drug discovery projects. The use of pyrazole derivatives is based on their analgesic, anti-inflammatory, antipyretic, antiarrhythmic, sedative, muscle relaxant, neuroleptic, anticonvulsant, monoamine oxidase inhibitory, antidiabetic and antibacterial activities.Recommanded Product: 45887-08-9

Referemce:
Pyrazole – Wikipedia,
Pyrazoles – an overview | ScienceDirect Topics

Yano, Jason K. et al. published their research in Journal of Medicinal Chemistry in 2006 | CAS: 45887-08-9

3-(1H-Pyrazol-3-yl)pyridine (cas: 45887-08-9) belongs to pyrazole derivatives. Pyrazole and its derivatives are considered a pharmacologically important active scaffold that possesses almost all types of pharmacological activities. The pyrazole ring is resistant to oxidation and reduction but the groups, such as alkyl and formyl attached to the ring, are oxidized to respective acids. Only electrolytic oxidation, ozonolysis, and a strong base cause ring opening.Electric Literature of C8H7N3

Synthetic Inhibitors of Cytochrome P-450 2A6: Inhibitory Activity, Difference Spectra, Mechanism of Inhibition, and Protein Cocrystallization was written by Yano, Jason K.;Denton, Travis T.;Cerny, Matthew A.;Zhang, Xiaodong;Johnson, Eric F.;Cashman, John R.. And the article was included in Journal of Medicinal Chemistry in 2006.Electric Literature of C8H7N3 This article mentions the following:

A series of 3-heteroaromatic analogs of nicotine were synthesized to delineate structural and mechanistic requirements for selectively inhibiting human cytochrome P 450 (CYP) 2A6. Thiophene, substituted thiophene, furan, substituted furan, acetylene, imidazole, substituted imidazole, thiazole, pyrazole, substituted pyrazole, and aliphatic and isoxazol moieties were used to replace the N-methylpyrrolidine ring of nicotine. A number of potent inhibitors were identified, and several exhibited high selectivity for CYP2A6 relative to CYP2E1, -3A4, -2B6, -2C9, -2C19, and -2D6. The majority of these inhibitors elicited type II difference spectra indicating the formation of a coordinate covalent bond to the heme iron. The majority of inhibitors were reversible inhibitors although several mechanism-based inactivators were identified. Most of the inhibitors were also relatively metabolically stable. X-ray crystal structures of CYP2A6 cocrystd. with three furan analogs bearing methanamino side chains indicated that the amine side chain coordinated to the heme iron. The pyridyl moiety was positioned to accept a hydrogen bond from Asn297, and all three inhibitors exhibited orthogonal aromatic-aromatic interactions with protein side chains. For comparison, the cocrystal structure of 4,4′-dipyridyl disulfide was also obtained and showed that the pyridine moiety could assume a different orientation than that observed for the 3-heteroaromatic pyridines examined For the 3-heteroromatic pyridines, N-Me and N,N-di-Me amino groups increased the apparent Ki and distorted helix I of the protein. Substitution of a Ph ring for the pyridyl ring also increased the apparent Ki, which is likely to reflect the loss of the hydrogen bonding interaction with Asn297. In contrast, inhibitory potency for other P450s was increased, and the selectivity of the Ph analogs for CYP2A6 was decreased relative to the pyridyl compounds The results suggest that inhibitors that compliment the active site features of CYP2A6 can exhibit significant selectivity for CYP2A6 relative to other human liver drug-metabolizing P450s. In the experiment, the researchers used many compounds, for example, 3-(1H-Pyrazol-3-yl)pyridine (cas: 45887-08-9Electric Literature of C8H7N3).

3-(1H-Pyrazol-3-yl)pyridine (cas: 45887-08-9) belongs to pyrazole derivatives. Pyrazole and its derivatives are considered a pharmacologically important active scaffold that possesses almost all types of pharmacological activities. The pyrazole ring is resistant to oxidation and reduction but the groups, such as alkyl and formyl attached to the ring, are oxidized to respective acids. Only electrolytic oxidation, ozonolysis, and a strong base cause ring opening.Electric Literature of C8H7N3

Referemce:
Pyrazole – Wikipedia,
Pyrazoles – an overview | ScienceDirect Topics

Gough, Geo. A. C. et al. published their research in Journal of the Chemical Society in 1933 | CAS: 45887-08-9

3-(1H-Pyrazol-3-yl)pyridine (cas: 45887-08-9) belongs to pyrazole derivatives. As is the case with imidazoles, the pyrazole ring offers many opportunities to create new multiring systems that incorporate this heterocycle. Protonation of pyrazole in strong acid leads to pyrazolium cations, which undergo electrophilic substitution preferentially at C3 rather than C4. The pyrazole anion is not reactive toward nucleophiles but is mostly reactive to electrophiles.Application of 45887-08-9

4-Nitro-5-(3-pyridyl)pyrazole, a new oxidation product of nicotine. III. Confirmatory synthetical experiments was written by Gough, Geo. A. C.;King, Harold. And the article was included in Journal of the Chemical Society in 1933.Application of 45887-08-9 This article mentions the following:

The by-product in the oxidation of nicotine to nicotinic acid, 4-nitro-5-(3-pyridyl)pyrazole (C. A. 26, 990), gives the 4-NH2 derivative, which on deamination gives 3-(5-pyridyl)pyrazole (I), whose picrate, crystals with 1 H2O, m. 194-5°, methiodide, m. 217.5°, methopicrate, m. 185°, flavianate, crystals with 2 H2O, orange, m. 229° (decomposition). β-Pyridoylacetone and N2H4 give quant. 3-methyl-5-(3-pyridyl)pyrazole, crystals with 1.5 H2O, m. 81-3°, and then 137-8°; picrate, m. 202-3°; HCl salt, m. 214-6°; oxidation with KMnO4 gives 5-(3-pyridyl)pyrazole-3-carboxylic acid, m. 308-10° (decomposition); picrate, m. 242-5°; heating at 310° gives I. In the experiment, the researchers used many compounds, for example, 3-(1H-Pyrazol-3-yl)pyridine (cas: 45887-08-9Application of 45887-08-9).

3-(1H-Pyrazol-3-yl)pyridine (cas: 45887-08-9) belongs to pyrazole derivatives. As is the case with imidazoles, the pyrazole ring offers many opportunities to create new multiring systems that incorporate this heterocycle. Protonation of pyrazole in strong acid leads to pyrazolium cations, which undergo electrophilic substitution preferentially at C3 rather than C4. The pyrazole anion is not reactive toward nucleophiles but is mostly reactive to electrophiles.Application of 45887-08-9

Referemce:
Pyrazole – Wikipedia,
Pyrazoles – an overview | ScienceDirect Topics

Prananto, Yuniar P. et al. published their research in Australian Journal of Chemistry in 2009 | CAS: 45887-08-9

3-(1H-Pyrazol-3-yl)pyridine (cas: 45887-08-9) belongs to pyrazole derivatives. An alternative way to synthesize multisubstituted pyrazoles is the Csingle bondH arylation of simple pyrazoles. Protonation of pyrazole in strong acid leads to pyrazolium cations, which undergo electrophilic substitution preferentially at C3 rather than C4. The pyrazole anion is not reactive toward nucleophiles but is mostly reactive to electrophiles.Recommanded Product: 3-(1H-Pyrazol-3-yl)pyridine

Solvent-Induced Structural Changes in Complexes of 1,2-Bis(3-(3-pyridyl)pyrazolyl)ethane was written by Prananto, Yuniar P.;Turner, David R.;Lu, Jinzhen;Batten, Stuart R.. And the article was included in Australian Journal of Chemistry in 2009.Recommanded Product: 3-(1H-Pyrazol-3-yl)pyridine This article mentions the following:

A series of complexes were obtained using the flexible ditopic ligand 1,2-bis(3-(3-pyridyl)pyrazolyl)ethane (LEt) with M(SCN)2 (M = Co, Fe) and ZnCl2. The ligand exists in a variety of conformations with rotations around the ethane spacer and around the pyridyl/pyrazole bond. The bridging length of the ligand (i.e., distance between pyridyl nitrogen atoms) varies by 3.5 Å depending on its geometry. Three different cobalt(II) complexes of the general form [Co(LEt)2(SCN)2]·Solv (Solv is a variable number/type of non-coordinated solvent) were structurally characterized and form a series of solvent dependant supramol. isomers. When Solv = 2MeCN a (4,4)-sheet is formed (1), however, when Solv = H2O an alternate collapsed (4,4)-sheet is observed (2). Changing the solvent to two mols. of N,N-dimethylformamide (DMF) leads to a radical change in structure with a one-dimensional (1D) polymer formed (3) that contains two bridging ligands between adjacent metal atoms (i.e., maintaining the same metal/ligand ratio as in the (4,4)-sheet structures). A monomeric thiocyanate complex [Fe(LEt)2(SCN)2(H2O)2] (4) is reported in which the bispyridyl ligands are terminal and partake in an extended hydrogen-bonded network. A 1D polymer [Zn(LEt)Cl2] (5) is also presented. The structures of the metal complexes are contrasted with that of the free ligand. In the experiment, the researchers used many compounds, for example, 3-(1H-Pyrazol-3-yl)pyridine (cas: 45887-08-9Recommanded Product: 3-(1H-Pyrazol-3-yl)pyridine).

3-(1H-Pyrazol-3-yl)pyridine (cas: 45887-08-9) belongs to pyrazole derivatives. An alternative way to synthesize multisubstituted pyrazoles is the Csingle bondH arylation of simple pyrazoles. Protonation of pyrazole in strong acid leads to pyrazolium cations, which undergo electrophilic substitution preferentially at C3 rather than C4. The pyrazole anion is not reactive toward nucleophiles but is mostly reactive to electrophiles.Recommanded Product: 3-(1H-Pyrazol-3-yl)pyridine

Referemce:
Pyrazole – Wikipedia,
Pyrazoles – an overview | ScienceDirect Topics

Li, Jun-Chi et al. published their research in Crystal Growth & Design in 2016 | CAS: 45887-08-9

3-(1H-Pyrazol-3-yl)pyridine (cas: 45887-08-9) belongs to pyrazole derivatives. Pyrazole has two ring nitrogen atoms in which N1 is pyrrolic and N2 is pyridine-like. The N1 nitrogen is not reactive but is deprotonated in the presence of a base-forming anion. The presence of both electronegative nitrogen atoms in the pyrazole ring reduces the electron density of the C3- and C5-positions leaving electron density of C4-position unaltered. Thus the C4-position is vulnerable to electrophilic attack. The C3 electrophilic-position may undergo deprotonation in the presence of a strong base leading to ring opening.Category: pyrazoles-derivatives

Ligand Coordination Site-Directed Assembly of Copper(I) Iodide Complexes of ((Pyridyl)-1-pyrazolyl)pyridine was written by Li, Jun-Chi;Li, Hong-Xi;Li, Hai-Yan;Gong, Wei-Jie;Lang, Jian-Ping. And the article was included in Crystal Growth & Design in 2016.Category: pyrazoles-derivatives This article mentions the following:

((Pyridinyl)-1H-pyrazolyl)pyridine (pypzpy) ligands in which the pyrazolyl ring at 1 and 3 positions is substituted by two 2-, 3-, or 4-pyridyl groups were prepared Reaction of CuI with 2-(1-(pyridin-2-yl)-1H-pyrazolyl)pyridine (2,2′-pypzpy) in MeCN at room temperature or solvothermal reaction of the same components at 120° afforded a binuclear complex [{(2,2′-pypzpy)Cu}(μ-I)]2 (1). Treatment of CuI with 3-(1-(pyridin-2-yl)-1H-pyrazolyl)pyridine (3,2′-pypzpy) at room temperature or at 120° produced 1-dimensional (1D) polymer [{Cu33-I)3}(μ-3,2′-pypzpy)]n (2) and one two-dimensional (2D) polymer [{Cu2(μ-I)(μ3-I)}2(3,2′-pypzpy)2]n (3), resp. Similar reactions of CuI with 4-(1-(pyridin-2-yl)-1H-pyrazolyl)pyridine (4,2′-pypzpy) at room temperature or at 150° yielded one 1-dimensional polymeric complex [{Cu(μ3-I)}2(4,2′-pypzpy)2{Cu(μ-I)}2]n (4). [{Cu33-I)3}(μ-2,3′-pypzpy)]n (5), [(CuI)(μ-2,3′-pypzpy)]2 (6), [(Cu2I2)(3,3′-pypzpy)] (7), [(CuI)(4,3′-pypzpy)] (8), [{Cu(μ3-I)}2(μ-2,4′-pypzpy)2{Cu(μ-I)}2]n (9), [(CuI)(3,4′-pypzpy)] (10), and [(CuI)(μ-4,4′-pypzpy)]n (11) could be isolated by solution reactions or solvothermal reactions of CuI with 2-, 3-, 4-(1-(pyridin-3-yl)-1H-pyrazolyl)pyridine (2,3′-, 3,3′-, 4,3′-pypzpy), or 2-, 3-, 4-(1-(pyridin-4-yl)-1H-pyrazolyl)pyridine (2,4′-, 3,4′-, 4,4′-pypzpy). Compounds 111 were characterized by IR, elemental anal., powder x-ray diffraction, and single-crystal X-ray crystallog. Complex 1 contains a normal [Cu(μ-I)]2 dimeric structure. 2 And 5 consist of a unique displaced staircase chain [Cu23-I)2]n. Complex 3 has a 2-dimensional network formed by linking chairlike [Cu2(μ-I)(μ3-I)]2 units with two pairs of 3,2′-pypzpy bridges. Complexes 4 and 9 have a rare 1-dimensional triple chain, in which one internal 1-dimensional ladder-like chain [Cu23-I)2]n is connected with two zigzag chains [Cu(μ-I)]n via 4,2′-pypzpy or 2,4′-pypzpy ligands. 6 Consists of two [CuI] units interconnected by two 2,3′-pypzpy ligands. Compound 11 contains a 1-dimensional chain assembled by monomeric [CuI] units and 4,4′-pypzpy ligands. The luminescent properties of 111 in solid state were also studied at room temperature These results offer an interesting insight into how the coordination sites of the pypzpy ligands exert great impact on their coordination modes, the coordination spheres of the Cu(I) centers, the formation of the [CunIn] motifs and the topol. structures of the final complexes. In the experiment, the researchers used many compounds, for example, 3-(1H-Pyrazol-3-yl)pyridine (cas: 45887-08-9Category: pyrazoles-derivatives).

3-(1H-Pyrazol-3-yl)pyridine (cas: 45887-08-9) belongs to pyrazole derivatives. Pyrazole has two ring nitrogen atoms in which N1 is pyrrolic and N2 is pyridine-like. The N1 nitrogen is not reactive but is deprotonated in the presence of a base-forming anion. The presence of both electronegative nitrogen atoms in the pyrazole ring reduces the electron density of the C3- and C5-positions leaving electron density of C4-position unaltered. Thus the C4-position is vulnerable to electrophilic attack. The C3 electrophilic-position may undergo deprotonation in the presence of a strong base leading to ring opening.Category: pyrazoles-derivatives

Referemce:
Pyrazole – Wikipedia,
Pyrazoles – an overview | ScienceDirect Topics

Xue, Jiang-Yan et al. published their research in Tetrahedron in 2016 | CAS: 45887-08-9

3-(1H-Pyrazol-3-yl)pyridine (cas: 45887-08-9) belongs to pyrazole derivatives. Pyrazole is a weak base, with pKb 11.5 (pKa of the conjugated acid 2.49 at 25 °C).Pyrazole used as a ligand to prepare organometallic compounds. Protonation of pyrazole in strong acid leads to pyrazolium cations, which undergo electrophilic substitution preferentially at C3 rather than C4. The pyrazole anion is not reactive toward nucleophiles but is mostly reactive to electrophiles.HPLC of Formula: 45887-08-9

Chan-Lam cross-coupling reactions promoted by anionic copper(I)/iodide species with cationic methyl-((pyridinyl)-pyrazolyl)pyridin-1-ium was written by Xue, Jiang-Yan;Li, Jun-Chi;Li, Hong-Xi;Li, Hai-Yan;Lang, Jian-Ping. And the article was included in Tetrahedron in 2016.HPLC of Formula: 45887-08-9 This article mentions the following:

Four anionic ligands including 1-methyl-3(or 4)-(1-(pyridin-2-yl)-1H-pyrazol-3-yl)pyridin-1-ium iodide ([3,2′-pypzpym]I, [4,2′-pypzpym]I) and 1-methyl-3(or 4)-(3-(pyridin-2-yl)-1H-pyrazol-1-yl)pyridin-1-ium iodide ([2,3′-pypzpym]I, [2,4′-pypzpym]I) were prepared Reaction of CuI with [3,2′-pypzpym]I afforded a mononuclear complex [CuI2(3,2′-pypzpym)] and a one-dimensional coordination polymer [(Cu4I6)(3,2′-pypzpym)2]n. Analogous reactions of CuI with [4,2′-pypzpym]I, [2,3′-pypzpym]I or [2,4′-pypzpym]I yield [Cu4I6(4,2′-pypzpym)2], [CuI2(2,3′-pypzpym)] and [CuI2(2,4′-pypzpym)], resp. Relative to that of CuI, complexes exhibited enhanced catalytic activities towards the Chan-Lam cross-coupling reactions of imidazoles and arylboronic acids in a H2O-MeCN (volume/volume=2:1). This catalytic system was involved in the C-N cross-coupling reaction and works for a variety of imidazole derivatives as well as arylboronic acids with different electronic properties. In the experiment, the researchers used many compounds, for example, 3-(1H-Pyrazol-3-yl)pyridine (cas: 45887-08-9HPLC of Formula: 45887-08-9).

3-(1H-Pyrazol-3-yl)pyridine (cas: 45887-08-9) belongs to pyrazole derivatives. Pyrazole is a weak base, with pKb 11.5 (pKa of the conjugated acid 2.49 at 25 °C).Pyrazole used as a ligand to prepare organometallic compounds. Protonation of pyrazole in strong acid leads to pyrazolium cations, which undergo electrophilic substitution preferentially at C3 rather than C4. The pyrazole anion is not reactive toward nucleophiles but is mostly reactive to electrophiles.HPLC of Formula: 45887-08-9

Referemce:
Pyrazole – Wikipedia,
Pyrazoles – an overview | ScienceDirect Topics