In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 2-(3,4-Dimethylphenyl)-5-methyl-1H-pyrazol-3(2H)-one, other downstream synthetic routes, hurry up and to see.
Adding a certain compound to certain chemical reactions, such as: 277299-70-4, name is 2-(3,4-Dimethylphenyl)-5-methyl-1H-pyrazol-3(2H)-one, belongs to pyrazoles-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 277299-70-4, Product Details of 277299-70-4
1) Take 2-nitro-6-bromophenol 12%, potassium carbonate 5% and benzyl bromide 7% in turn, and pour into 120 ml of acetonitrile solution for reflux reaction.After the reflux reaction was heated to 90 C and the temperature was maintained at 90 C for 3 hours, the reflux was continued.The reflux apparatus was cooled to room temperature, the resulting solution was filtered and concentrated to a dry solid, and the solid was placed in a 100 ml glass dish, and 40 ml of a triethylamine liquid was added to continuously heat the glass dish.Until white crystals appear on the solid surface,The glass dish is cooled, the solid is washed and dried with water, and the above materials are reserved for use; 2) The material obtained in the step 1) is dissolved in 100 ml of ethyl acetate, washed successively with 50 ml of water and 50 ml of a saturated sodium chloride solution, and after washing, anhydrous sodium sulfate crystals are added for moisture absorption and drying. The solution is filtered and concentrated to dry crystals, and the above materials are reserved for use; 3) Take 5% potassium carbonate, 6% 3-carboxybenzeneboronic acid, 5% palladium dichloride,20 ml of dioxane and 40 ml of water were placed in a 100 ml glass dish to react with the material prepared in step 2).After heating to 50 C in the reaction state, keep the temperature at 50 C and a pressure of 1 MPa was added to the nitrogen to carry out a protective reaction for four hours.Then, the temperature is lowered, the liquid in the glass dish is filtered, and after distilling off the dioxane under reduced pressure, water and a 1 mol/L hydrochloric acid solution are added to adjust the pH.The solution was filtered to obtain a solid, and placed in a 100 ml glass dish, 80 ml of isopropanol and an aqueous solution prepared in a ratio of 3:1 were added to carry out recrystallization, and the above materials were reserved for use; 4) The material prepared in the step 3) is placed in a 350 ml solution of ethyl acetate, 2% of palladium on carbon is placed in the solution, and hydrogen is reacted for 10 hours.The solution was filtered and concentrated to dry crystals, placed in a 100 ml glass dish, 80 ml of methanol was added to recrystallize, and the above materials were reserved for use;5) Take 2-(3,4-dimethylphenyl)-1,2-dihydro-5-methyl-3H-pyrazol-3-one 8% in order and mix in a ratio of 1:1:2 70ml of sodium nitrate,Sodium bicarbonate and an aqueous solution are placed in a 100 ml glass dish to react with the material prepared in step 4).After the reaction is completed, 20 ml of ethanolamine is added and hydrogen is introduced to carry out the reaction to obtain Eltrombopag;
In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 2-(3,4-Dimethylphenyl)-5-methyl-1H-pyrazol-3(2H)-one, other downstream synthetic routes, hurry up and to see.