Category: 4149-06-8

Adding a certain compound to certain chemical reactions, such as: 4149-06-8, name is 3-Amino-1-phenyl-1H-pyrazol-5(4H)-one, belongs to pyrazoles-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 4149-06-8, Application In Synthesis of 3-Amino-1-phenyl-1H-pyrazol-5(4H)-one

A solution of 3-amino-1-phenyl-2-pyrazolin-5-one 1 (0.35 g, 2 mmol), dimedone 2 (0.28 g, 2 mmol), aldehyde 3 (0.28 mg, 2 mmol) and Cell-LA-TEA+/Fe3O4 nanocatalyst (0.03 g, 0.09 mol%) in H2O/EtOH (3:2) was subjected to ultrasonic irradiation (ultrasonic bath, room temperature). The progress of the reaction was controlled by TLC (hexane/ethyl acetate, 2:3). After reaction completion, the nanocatalyst was separated magnetically from the reaction mixture and used for subsequent cycles after washing with ethanol. By cooling the reaction solution, the solid product was collected, separated and recrystallized from methanol to get the pure product.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Article; Zahedifar, Mahboobeh; Pouramiri, Behjat; Razavi, Razieh; Research on Chemical Intermediates; vol. 46; 5; (2020); p. 2749 – 2765;,
Pyrazole – Wikipedia,
Pyrazoles – an overview | ScienceDirect Topics

Synthetic Route of 4149-06-8,Some common heterocyclic compound, 4149-06-8, name is 3-Amino-1-phenyl-1H-pyrazol-5(4H)-one, molecular formula is C9H9N3O, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: To a mixture of 3-amino-1-phenyl-2-pyrazolin-5-one 1 (0.35 g, 2 mmol), dimedone 2 (0.28 g, 2 mmol), and aldehyde 3 (2 mmol) in 15 mL ethanol, 0.14 g (0.004 mol %) H3PW12O40 was added. The reaction mixture was refluxed at 80 C for the time reported in Table 1. Reaction progress was monitored by TLC using EtOAc-hexane (60:40) as eluent. After reaction completion, 50 mL cold water was added to the reaction mixture. The crude product was recrystallized using methanol to obtain the pure product.

The synthetic route of 4149-06-8 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Zahedifar, Mahboobeh; Shojaei, Reza; Sheibani, Hassan; Research on Chemical Intermediates; vol. 44; 2; (2018); p. 873 – 882;,
Pyrazole – Wikipedia,
Pyrazoles – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 4149-06-8, name is 3-Amino-1-phenyl-1H-pyrazol-5(4H)-one, belongs to pyrazoles-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 4149-06-8, Recommanded Product: 4149-06-8

General procedure: The mixture of isatin (1 mmol), 3-amino-1-phenyl-1H-pyrazol-5(4H)-one (1 mmol), 1,2-diarylethan-1-one, 2,3-dihydroinden-1-one (1 mmol) or 3,4-dihydronaphthalen-1(2H)-one (1 mmol), H2O (6 mL), HOAc (2 mL) was put in a reaction flask under 90 C about 5-7 h (monitored by TLC). After completion, the reaction mixture was cooled to room temperature and the products would be isolated out at same time. Then, compound 4 was recrystallized from DMF, however, the pure products of 6 and 8 were filtered from water, dried, without further recrystallization.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Article; Wang, Zhansheng; Gao, Lingli; Xu, Zhongyun; Ling, Zhi; Qin, Yaqi; Rong, Liangce; Tu, Shu-Jiang; Tetrahedron; vol. 73; 4; (2017); p. 385 – 394;,
Pyrazole – Wikipedia,
Pyrazoles – an overview | ScienceDirect Topics

Related Products of 4149-06-8, Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 4149-06-8, name is 3-Amino-1-phenyl-1H-pyrazol-5(4H)-one, This compound has unique chemical properties. The synthetic route is as follows.

General procedure: The mixture of alpha,beta-unsaturated ketone 1, or 4 (1.0 mmol), 3-amino-1-phenyl-1H-pyrazol-5(4H)-one 2 (1.0 mmol), p-TSAxH2O (0.3mmol), MeCN (4mL), H2O (4mL) was put in a reaction flask under 80 C about 1-3 h (monitored by TLC). After completion, the reaction mixture was cooled to room temperature and the products would be precipitated out at same time. Then, it was filtered, washed thoroughly with MeCN. The products were recrystallized from DMF.

The chemical industry reduces the impact on the environment during synthesis 3-Amino-1-phenyl-1H-pyrazol-5(4H)-one. I believe this compound will play a more active role in future production and life.

Reference:
Article; Xu, Shuangshuang; Wang, Zhansheng; Li, Xiuling; Rong, Liangce; Tu, Shu-Jiang; Tetrahedron; vol. 72; 38; (2016); p. 5754 – 5761;,
Pyrazole – Wikipedia,
Pyrazoles – an overview | ScienceDirect Topics

Electric Literature of 4149-06-8, Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 4149-06-8, name is 3-Amino-1-phenyl-1H-pyrazol-5(4H)-one, This compound has unique chemical properties. The synthetic route is as follows.

General procedure: The mixture of isatin (1 mmol), 3-amino-1-phenyl-1H-pyrazol-5(4H)-one (1 mmol), 1,2-diarylethan-1-one, 2,3-dihydroinden-1-one (1 mmol) or 3,4-dihydronaphthalen-1(2H)-one (1 mmol), H2O (6 mL), HOAc (2 mL) was put in a reaction flask under 90 C about 5-7 h (monitored by TLC). After completion, the reaction mixture was cooled to room temperature and the products would be isolated out at same time. Then, compound 4 was recrystallized from DMF, however, the pure products of 6 and 8 were filtered from water, dried, without further recrystallization.

The chemical industry reduces the impact on the environment during synthesis 3-Amino-1-phenyl-1H-pyrazol-5(4H)-one. I believe this compound will play a more active role in future production and life.

Reference:
Article; Wang, Zhansheng; Gao, Lingli; Xu, Zhongyun; Ling, Zhi; Qin, Yaqi; Rong, Liangce; Tu, Shu-Jiang; Tetrahedron; vol. 73; 4; (2017); p. 385 – 394;,
Pyrazole – Wikipedia,
Pyrazoles – an overview | ScienceDirect Topics

Reference of 4149-06-8, These common heterocyclic compound, 4149-06-8, name is 3-Amino-1-phenyl-1H-pyrazol-5(4H)-one, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

A solution of 3-amino-1-phenyl-2-pyrazolin-5-one 1 (0.35 g, 2 mmol), dimedone 2 (0.28 g, 2 mmol), aldehyde 3 (0.28 mg, 2 mmol) and Cell-LA-TEA+/Fe3O4 nanocatalyst (0.03 g, 0.09 mol%) in H2O/EtOH (3:2) was subjected to ultrasonic irradiation (ultrasonic bath, room temperature). The progress of the reaction was controlled by TLC (hexane/ethyl acetate, 2:3). After reaction completion, the nanocatalyst was separated magnetically from the reaction mixture and used for subsequent cycles after washing with ethanol. By cooling the reaction solution, the solid product was collected, separated and recrystallized from methanol to get the pure product.

Statistics shows that 3-Amino-1-phenyl-1H-pyrazol-5(4H)-one is playing an increasingly important role. we look forward to future research findings about 4149-06-8.

Reference:
Article; Zahedifar, Mahboobeh; Pouramiri, Behjat; Razavi, Razieh; Research on Chemical Intermediates; vol. 46; 5; (2020); p. 2749 – 2765;,
Pyrazole – Wikipedia,
Pyrazoles – an overview | ScienceDirect Topics

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 4149-06-8, name is 3-Amino-1-phenyl-1H-pyrazol-5(4H)-one, This compound has unique chemical properties. The synthetic route is as follows., Quality Control of 3-Amino-1-phenyl-1H-pyrazol-5(4H)-one

General procedure: A mixture of substituted 3-(2-aryl-2-oxoethylidene)indolin-2-one 1 (1 mmol), 1,3-dimethylurea (2, 1.2 mmol) or 5-amino-2-phenyl-2,4-dihydro-3H-pyrazol-3-one (4, 1 mmol), PTSA·H2O (0.3 mmol), and MeCN (5 mL) was added to a 25 mL flask and reacted at 80 C (monitored by TLC) about 2 h. After completion, the mixture was cooled to r.t. and the precipitate obtained was isolated by filtration and drying. Compounds 3 or 5 were purified by recrystallization (DMF or EtOH).

According to the analysis of related databases, 4149-06-8, the application of this compound in the production field has become more and more popular.

Reference:
Article; Dai, Lei; Shu, Ping; Wang, Zhansheng; Li, Qingyang; Yu, Qiuyu; Shi, Yanhui; Rong, Liangce; Synthesis; vol. 49; 3; (2017); p. 637 – 646;,
Pyrazole – Wikipedia,
Pyrazoles – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 4149-06-8, name is 3-Amino-1-phenyl-1H-pyrazol-5(4H)-one, A new synthetic method of this compound is introduced below., Quality Control of 3-Amino-1-phenyl-1H-pyrazol-5(4H)-one

General prodedure: NaH (1 mmol) was suspended in DMF (8 mL), then 3-amino-1-phenyl-2-pyrazolin-5-one (1) (0.48 mmol) was dissolved in DMF (10 mL) and added slowly. The mixture was stirred for 30 min at 0 C. Next vinamidinium salt 2 (0.48 mmol) was added and the resulting mixture heated at 80 C for 6 h and the residue partitioned between CH2Cl2 and H2O. The aqueous layer was extracted with CH2Cl2 and the combined organic layers dried over Na2SO4, filtered and the solvents removed in vacuo. The crude residue was purified by column chromatography (10% EtOAc in hexane) to give products 3a-e. For pyrazolo[3,4-b]pyridine 3f, after evaporation of the solvent, THF (6 mL) and 1 N HCl (6 mL) were added. The mixture was allowed to stir at room temperature for 2 h, then neutralized with saturated aqueous NaHCO3 and extracted with CH2Cl2 (3 × 15 mL). Work-up and purification as above gave 3f.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Article; Samar, Chtiba; Fayel, Jemmezi; Jameleddine, Khiari; Tetrahedron Letters; vol. 52; 28; (2011); p. 3648 – 3650;,
Pyrazole – Wikipedia,
Pyrazoles – an overview | ScienceDirect Topics

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 4149-06-8, name is 3-Amino-1-phenyl-1H-pyrazol-5(4H)-one, This compound has unique chemical properties. The synthetic route is as follows., COA of Formula: C9H9N3O

General procedure: The mixture of isatin (1 mmol), 3-amino-1-phenyl-1H-pyrazol-5(4H)-one (1 mmol), 1,2-diarylethan-1-one, 2,3-dihydroinden-1-one (1 mmol) or 3,4-dihydronaphthalen-1(2H)-one (1 mmol), H2O (6 mL), HOAc (2 mL) was put in a reaction flask under 90 C about 5-7 h (monitored by TLC). After completion, the reaction mixture was cooled to room temperature and the products would be isolated out at same time. Then, compound 4 was recrystallized from DMF, however, the pure products of 6 and 8 were filtered from water, dried, without further recrystallization.

According to the analysis of related databases, 4149-06-8, the application of this compound in the production field has become more and more popular.

Reference:
Article; Wang, Zhansheng; Gao, Lingli; Xu, Zhongyun; Ling, Zhi; Qin, Yaqi; Rong, Liangce; Tu, Shu-Jiang; Tetrahedron; vol. 73; 4; (2017); p. 385 – 394;,
Pyrazole – Wikipedia,
Pyrazoles – an overview | ScienceDirect Topics

Application of 4149-06-8, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 4149-06-8, name is 3-Amino-1-phenyl-1H-pyrazol-5(4H)-one belongs to pyrazoles-derivatives compound, it is a common compound, a new synthetic route is introduced below.

General procedure: The mixture of alpha,beta-unsaturated ketone 1, or 4 (1.0 mmol), 3-amino-1-phenyl-1H-pyrazol-5(4H)-one 2 (1.0 mmol), p-TSAxH2O (0.3mmol), MeCN (4mL), H2O (4mL) was put in a reaction flask under 80 C about 1-3 h (monitored by TLC). After completion, the reaction mixture was cooled to room temperature and the products would be precipitated out at same time. Then, it was filtered, washed thoroughly with MeCN. The products were recrystallized from DMF.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 3-Amino-1-phenyl-1H-pyrazol-5(4H)-one, other downstream synthetic routes, hurry up and to see.

Reference:
Article; Xu, Shuangshuang; Wang, Zhansheng; Li, Xiuling; Rong, Liangce; Tu, Shu-Jiang; Tetrahedron; vol. 72; 38; (2016); p. 5754 – 5761;,
Pyrazole – Wikipedia,
Pyrazoles – an overview | ScienceDirect Topics