Category: 131797-35-8

Adding a certain compound to certain chemical reactions, such as: 131797-35-8, name is 5-Chloro-3-(trifluoromethyl)-1H-pyrazole, belongs to pyrazoles-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 131797-35-8, Product Details of 131797-35-8

To a solution of 2-chloro-7-(chloromethyl)-N-ethyl-5-oxo-5H-[l,3]thiazolo[3,2-a]pyrimidine- 3-carboxamide (2 g, 6.53 mmol) in acetonitrile (10 mL) was added 5-chloro-3-(trifluoromethyl)-lH- pyrazole (872 mg, 5.11 mmol), potassium iodide (542 mg, 3.26 mmol), and potassium carbonate (1.8 g, 13 mmol). The resulting mixture was stirred for 1 h at 80 C and concentrated in vacuo. The residue was purified by flash chromatography on silica gel eluting with ethyl acetate/petroleum ether (1/1) to afford of 2-chloro-7-[[5-chloro-3-(trifluoromethyl)-lH-pyrazol-l-yl]methyl]-N-ethyl-5-oxo-5H- [l,3]thiazolo[3,2-a]pyrimidine-3-carboxamide (1.1 g, 38%) as a yellow solid. LCMS (ESI): M+H + = 441.0.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 5-Chloro-3-(trifluoromethyl)-1H-pyrazole, and friends who are interested can also refer to it.

Reference:
Patent; F. HOFFMANN-LA ROCHE AG; GENENTECH, INC.; YU, Jiang; WU, Guosheng; YUEN, Po-Wai; VILLEMURE, Elisia; SCHWARZ, Jacob; LY, Cuong; SELLERS, Benjamin; VOLGRAF, Matthew; WO2015/52226; (2015); A1;,
Pyrazole – Wikipedia,
Pyrazoles – an overview | ScienceDirect Topics

Synthetic Route of 131797-35-8, A common heterocyclic compound, 131797-35-8, name is 5-Chloro-3-(trifluoromethyl)-1H-pyrazole, molecular formula is C4H2ClF3N2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a solution of ethyl 2-[7-(chloromethyl)-2-methyl-5-oxo-5H-[l,3]thiazolo[3,2-a]pyrimidin- 3-yl]propanoate (2 g, 6.35 mmol) in acetonitrile (30 mL) was added 5-chloro-3-(trifluoromethyl)-lH- pyrazole (1.1 g, 6.45 mmol), potassium iodide (1.06 g, 6.39 mmol), and potassium carbonate (2.2 g, 15.9 mmol). The resulting mixture was stirred for 2 h at 90 C, cooled to room temperature and concentrated in vacuo. The residue was purified by flash chromatography on silica gel eluting with ethyl acetate/petroleum ether (1/4) to afford ethyl 2-(7-[[5-chloro-3-(trifluoromethyl)-lH-pyrazol-l-yl]methyl]- 2-methyl-5-oxo-5H-[l,3]thiazolo[3,2-a]pyrimidin-3-yl)propanoate (2.9 g, crude) as a brown solid. LCMS (ESI): M+H+ = 449.0.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; F. HOFFMANN-LA ROCHE AG; GENENTECH, INC.; YU, Jiang; WU, Guosheng; YUEN, Po-Wai; VILLEMURE, Elisia; SCHWARZ, Jacob; LY, Cuong; SELLERS, Benjamin; VOLGRAF, Matthew; WO2015/52226; (2015); A1;,
Pyrazole – Wikipedia,
Pyrazoles – an overview | ScienceDirect Topics

Application of 131797-35-8, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 131797-35-8, name is 5-Chloro-3-(trifluoromethyl)-1H-pyrazole belongs to pyrazoles-derivatives compound, it is a common compound, a new synthetic route is introduced below.

To a suspension of 5-chloro-3-(trifluoromethyl)-lH-pyrazole (i.e. the product of Example 10, Step C) (2.1 g, 12.3 mmol) and potassium carbonate (3.6 g, 26.0 mmol) in 20 mL of Lambdar^-dimethylformamide was added ethyl bromoacetate (2.1 mL, 18.8 mmol), and the resulting mixture was stirred at room temperature for 12 h. The resulting mixture was diluted with ethyl acetate, washed with water, and dried (MgSC^). The reaction mixture was concentrated in vacuo and further purified by medium-pressure liquid chromatography using 0-50% of ethyl acetate in hexanes as eluant to give 940 mg of the title compound as an oil. 1H NMR (CDCl3) delta 1.29 (m, 3 H), 4.27 (q, 2 H), 4.96 (m, 2 H), 6.55 (s, 1 H).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 5-Chloro-3-(trifluoromethyl)-1H-pyrazole, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; E. I. DU PONT DE NEMOURS AND COMPANY; WO2008/13622; (2008); A2;,
Pyrazole – Wikipedia,
Pyrazoles – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 131797-35-8, name is 5-Chloro-3-(trifluoromethyl)-1H-pyrazole, A new synthetic method of this compound is introduced below., Product Details of 131797-35-8

To a mixture of 7-(chloromethyl)-3-propanoyl-2-(trifluoromethyl)-5H-[l,3]thiazolo[3,2- a]pyrimidin-5-one (15 mg, 0.05mmol) in acetonitrile (3 mL, 57.1mmol) was added potassium carbonate (13 mg, 0.09 mmol) and 5-chloro-3-(trifluoromethyl)-lH-pyrazole (10 mg, 0.06 mmol). The resulting mixture was stirred for 2 h at 80 C. After filtration and concentration, the residue was purified by chromatography with ethyl acetate/petroleum ether (1/3) to afford 7-[[5-chloro-3-(trifluoromethyl)-lH- pyrazol-l-yl]methyl]-3-propanoyl-2-(trifluoromethyl)-5H-[l,3]thiazolo[3,2-a]pyrimidin-5-one (4.5 mg, 21%) as a light brown solid. LCMS (ESI): M+H+ = 459.0; lU NMR (400 MHz, CDC13) delta 6.60 (s, 1H), 5.83 (s, 1H), 5.31 (s, 2H), 2.97-2.83 (m, 2H), 1.29-1.25 (m, 3H).

The synthetic route of 131797-35-8 has been constantly updated, and we look forward to future research findings.

Adding a certain compound to certain chemical reactions, such as: 131797-35-8, name is 5-Chloro-3-(trifluoromethyl)-1H-pyrazole, belongs to pyrazoles-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 131797-35-8, Safety of 5-Chloro-3-(trifluoromethyl)-1H-pyrazole

To a solution of 2-chloro-7-(chloromethyl)-N-ethyl-5-oxo-5H-[l,3]thiazolo[3,2-a]pyrimidine- 3-carboxamide (2 g, 6.53 mmol) in acetonitrile (10 mL) was added 5-chloro-3-(trifluoromethyl)-lH- pyrazole (872 mg, 5.11 mmol), potassium iodide (542 mg, 3.26 mmol), and potassium carbonate (1.8 g, 13 mmol). The resulting mixture was stirred for 1 h at 80 C and concentrated in vacuo. The residue was purified by flash chromatography on silica gel eluting with ethyl acetate/petroleum ether (1/1) to afford of 2-chloro-7-[[5-chloro-3-(trifluoromethyl)-lH-pyrazol-l-yl]methyl]-N-ethyl-5-oxo-5H- [l,3]thiazolo[3,2-a]pyrimidine-3-carboxamide (1.1 g, 38%) as a yellow solid. LCMS (ESI): M+H + = 441.0.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 5-Chloro-3-(trifluoromethyl)-1H-pyrazole, and friends who are interested can also refer to it.

131797-35-8, name is 5-Chloro-3-(trifluoromethyl)-1H-pyrazole, belongs to pyrazoles-derivatives compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. COA of Formula: C4H2ClF3N2

To a solution of 3-bromo-2-chloro-7-(chloromethyl)-5H-[l,3]thiazolo[3,2-a]pyrimidin-5-one (500 mg, 1.59 mmol) in acetonitrile (10 mL) was added 5-chloro-3-(trifluoromethyl)-lH-pyrazole (327 mg, 1.92 mmol), potassium iodide (133 mg, 0.80 mmol), and potassium carbonate (442 mg, 3.20 mmol) The resulting solution was stirred for 2 h at 80 C and cooled. The solid was filtered off and the filtrate was concentrated in vacuo. The residue was purified by flash chromatography on silica gel eluting with ethyl acetate/petroleum ether (1/9) to afford 3-bromo-2-chloro-7-(chloromethyl)-5H-[l,3]thiazolo[3,2- a]pyrimidin-5-one as a brown solid ( 300 mg, 60%). LCMS (ESI): M+H+ = 448.0.

The synthetic route of 131797-35-8 has been constantly updated, and we look forward to future research findings.

As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 131797-35-8 name is 5-Chloro-3-(trifluoromethyl)-1H-pyrazole, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below. 131797-35-8

Step 5: 6J-Dichloro-2-[[5-chloro-3-(trifluoromethyl)-lH-pyrazol-l-yllmethyll-4H-pyrido[l,2- alpyrimidin-4-one To a solution of 6,7-dichloro-2-(chloromethyl)-4H-pyrido[l,2-a]pyrimidin-4-one (1 g, 3.80 mmol) in acetonitrile (50 mL) was added 5-chloro-3-(trifluoromethyl)-lH-pyrazole (519 mg, 3.04 mmol), potassium iodide (317 mg, 1.91 mmol) and potassium carbonate (1.05 g, 7.60 mmol). The reaction was stirred for 1 h at 80C. Then the resulting mixture was concentrated in vacuo. The residue was purified by chromatography with ethyl acetate/petroleum ether (1/9) to afford 6,7-dichloro-2-[[5-chloro-3-(trifluoromethyl)-lH-pyrazol- 1- yl]methyl]-4H-pyrido[l,2-a]pyrimidin-4-one (600 mg, 40%) as yellow oil. LCMS (ESI): M+H+ = 397.1 ; HNMR (300 MHz, CDC13) delta 7.60 (d, J = 4.8 Hz, 1H), 7.34 (d, J = 4.8 Hz, 1H), 6.60 (s, 1H), 5.85 (s, 1H), 5.31 (s, 2H).

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 5-Chloro-3-(trifluoromethyl)-1H-pyrazole, and friends who are interested can also refer to it.