Category: 175137-46-9

Application of 175137-46-9, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 175137-46-9, name is 5-Cyclopropyl-1H-pyrazol-3-amine belongs to pyrazoles-derivatives compound, it is a common compound, a new synthetic route is introduced below.

To a solution of 1,2,4-trifluoro-5-nitrobenzene (3.0 g, 18 mmol) and DIEA (4.2 ml, 24 mmol) in dry THF (20 ml) was added dropwise the solution of 5-cyclopropyl-1H-pyrazol-3- amine (2.0 g, 16 mmol) in THF (5 ml) at 0 C. After addition, the reaction mixture was stirred at 25 C for 20 hrs. It was then heated to 40 C for 40 hrs. The solvent was removed under reduced pressure and the resulted residue was purified by column chromatography (hexane : EtOAc = 5 : 2). Recrystallization from EtOAc (10 ml) and hexanes (-100ml) gave the title compound as red crystals (0.8 g, 18%). NMR (400 MHz) 12.36 (s, 1H), 9.79 (s, 1H), 8.27 (m, 2H), 5.93 (s, 1H), 1.90 (m, 1H), 0.93 (m, 2H), 0.72 (m, 2H). MS: Calcd. : 280; Found: [M+H]+ 281.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 5-Cyclopropyl-1H-pyrazol-3-amine, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; ASTRAZENECA AB; ASTRAZENECA UK LIMITED; WO2005/103010; (2005); A2;,
Pyrazole – Wikipedia,
Pyrazoles – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 175137-46-9, name is 5-Cyclopropyl-1H-pyrazol-3-amine, belongs to pyrazoles-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 175137-46-9, category: pyrazoles-derivatives

To a solution of 2,4-difluoro-l -nitrobenzene (1.76 g, 11.1 mmol) and DIEA (1.93 ml, 11.1 mmol) in TEtaF (20 ml) was added dropwise a solution of 5-cyclopropyl-lH-pyrazol-3- amine (0.91 g, 7.39 mmol) in TEtaF (5 ml) at 25 C. After addition, the reaction mixture was stirred at 80 0C for 48 hours. The solvent was removed under reduced pressure and the resulted residue was purified by column chromatography (hexane : DCM : EtOAc = 2 : 1 : 1) to give the title compound as a yellow solid (0.62 g, 32%). NMR (400 MHz) 12.37 (s, IH), 9.83 (s, IH), 8.25 (m, IH), 7.98 (d, J= 11.2 Hz, IH), 6.75 (m, IH), 5.95 (s, IH), 1.90 (m, IH), 0.96 (m, 2H), 0.72 (m, 2H).

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; ASTRAZENECA AB; ASTRAZENECA UK LIMITED; WO2006/87530; (2006); A1;,
Pyrazole – Wikipedia,
Pyrazoles – an overview | ScienceDirect Topics

Related Products of 175137-46-9,Some common heterocyclic compound, 175137-46-9, name is 5-Cyclopropyl-1H-pyrazol-3-amine, molecular formula is C6H9N3, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a cold solution of 4,6-dichloropyrimidine-5-carbonitrile (500 mg, 2.87 mmol) in THF (10 mL) was added N,N-diisopropylethylamine (1.00 ml g, 5.75 mmol), followed by a solution of 3-cylopropyl-1-H-pyrazole amine (354 mg, 2.87 mmol) at 0 C. The resulting mixture was stirred at 0 C. for 2 hours. TLC was checked and the reaction was completed. After cooled to room temperature, half-saturated ammonium chloride in water (80 mL) was added and the mixture was stirred at room temperature for 15 min. The resulting solids were collected by filtration, washed by water to afford product compound 2 as yellow solids. (644 mg, 86% yield). 1H NMR (400 MHz, DMSO-d6) delta 12.42 (br, 1H), 10.35 (br, 1H), 8.55 (s, 1H), 6.12 (s, 1H), 1.89 (m, 1H), 0.92 (m, 2H), 0.67 (m, 2H); ESI-MS: calcd for (C11H9ClN6) 260, found 261 (MH+).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 5-Cyclopropyl-1H-pyrazol-3-amine, its application will become more common.

Adding a certain compound to certain chemical reactions, such as: 175137-46-9, name is 5-Cyclopropyl-1H-pyrazol-3-amine, belongs to pyrazoles-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 175137-46-9, category: pyrazoles-derivatives

A solution of 2,4,5-trichloropyrimidine (533 mg, 2.93 mmol), 3-amino-5-cyclopropyl- lH-pyrazole (360 mg, 2.93 mmol) and triethylamine (0.49 ml) in EtOH (5 ml) was stirred at room temperature for 10 hours. Solvent was removed and EtOAc was added. The solution was washed with water and dried over anhydrous sodium sulfate and was concentrated to give title compound as a white solid (546 mg, 69%). The compound was carried to the next step without further purification. 1HNMR delta 0.92 (m, 2H), 1.20 (m, 2H), 2.18 (m, IH), 6.40 (s, IH), 8.60 (s, IH), 9.90 (s, IH), 12.60 (s, IH).

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Adding a certain compound to certain chemical reactions, such as: 175137-46-9, name is 5-Cyclopropyl-1H-pyrazol-3-amine, belongs to pyrazoles-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 175137-46-9, name: 5-Cyclopropyl-1H-pyrazol-3-amine

A solution of S-cyclopropyl-lH-pyrazol-S-amine (1.9g, 16.0 mmol) in CH3CN (20 ml) was added dropwise to a solution of 2,6-dichloro-5-fluoronicotinonitrile (3.0 g, 16.0 mmol) and triethylamine (2.1 g, 20.0 mmol) in CH3CN (80 ml) at 25 C. The resulting solution was heated to 82 0C for 18 hrs, and then cooled to 25 0C. The resulted precipitate was collected by filtration and washed with CH3CN (100 ml) to give the title compound (3.2 g, 73%). MS:Calcd.: 277; Found: [M+H]+ 278.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Adding a certain compound to certain chemical reactions, such as: 175137-46-9, name is 5-Cyclopropyl-1H-pyrazol-3-amine, belongs to pyrazoles-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 175137-46-9, name: 5-Cyclopropyl-1H-pyrazol-3-amine

A solution of S-cyclopropyl-lH-pyrazol-S-amine (1.9g, 16.0 mmol) in CH3CN (20 ml) was added dropwise to a solution of 2,6-dichloro-5-fluoronicotinonitrile (3.0 g, 16.0 mmol) and triethylamine (2.1 g, 20.0 mmol) in CH3CN (80 ml) at 25 C. The resulting solution was heated to 82 0C for 18 hrs, and then cooled to 25 0C. The resulted precipitate was collected by filtration and washed with CH3CN (100 ml) to give the title compound (3.2 g, 73%). MS:Calcd.: 277; Found: [M+H]+ 278.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Application of 175137-46-9, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 175137-46-9, name is 5-Cyclopropyl-1H-pyrazol-3-amine belongs to pyrazoles-derivatives compound, it is a common compound, a new synthetic route is introduced below.

Method 70; 2-Chloro-6-methyl-4- (5-cyclopropvl-lH-pvrazol-3-vlamino) pvrimidine Sodium carbonate (2.15g, 20.25mmol) was added to a stirred solution of 2,4-dichloro- 6-methylpyrimidine (3g, 18. 4mmol) and 3-amino-1H-5-cyclopropylpyrazole (2.25g, 18.4mmol) in dry ethanol (40ml) and the mixture stirred at 40C for 4 days. The insoluble material was removed by filtration, the filter pad washed with ethanol. The volatiles were removed from the filtrate by evaporation keeping the bath below 40C. The residue was immediately purified by column chromatography on silica gel eluting with methanol/DCM (0: 100 increasing in polarity to 20: 80) to give the title product (1.9g, 46%) obtained as a white solid. NMR (DMSO): 0.65 (m, 2H), 0.90 (m, 2H), 2.25 (s, 3H), 5.90 (br s, 1H), 7.05 (br s, 1H), 10.15 (br s, 1H), 12.10 (br s, 1H); m/z 250 [MH] +.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 5-Cyclopropyl-1H-pyrazol-3-amine, other downstream synthetic routes, hurry up and to see.

Adding a certain compound to certain chemical reactions, such as: 175137-46-9, name is 5-Cyclopropyl-1H-pyrazol-3-amine, belongs to pyrazoles-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 175137-46-9, category: pyrazoles-derivatives

A mixture of (S)-6-chloro-Lambda/-(l-(4-fluorophenyl)ethyl)-3-nitropyridin-2-aniine (Method 19; 1.74 g, 5.88 mmol), S-cyclopropyl-lH-pyrazol-S-amine (0.91 g, 7.36 mmol), and DIEA (1.28 ml, 7.36 mmol) in W-BuOH (10 ml) was heated in a sealed tube at 160 C for 60 hours. The solvent was removed under reduced pressure and the residue was purified by chromatography (hexane: EtOAc = 1 : 1) to give the title compound as a yellow solid (1.35 g, 60%). NMR (400 MHz) 12.15 (s, IH), 10.43 (br, IH), 9.19 (br, IH), 8.12 (d, J= 9.2 Hz, IH), 7.45 (m, 2H), 7.17 (m, 2H), 6.25 (br, IH), 6.14 (br, IH), 5.45 (m, IH), 1.87 (m, IH), 1.60 (d, J= 6.8 Hz, 3H), 0.95 (m, 2H)5 0.65 (m, 2H). MS: Calcd.: 382; Found: [M+H]+ 383.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Adding a certain compound to certain chemical reactions, such as: 175137-46-9, name is 5-Cyclopropyl-1H-pyrazol-3-amine, belongs to pyrazoles-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 175137-46-9, Product Details of 175137-46-9

To a solution of 2,6-dichloro-3-nitropyridine (0.67 g, 3.2 mmol) and DIEA (0.46 ml, 2.65 mmol) in EtOH (20 ml) was added a S-cyclopropyl-l/f-pyrazol-S-amine (0.26 g, 2.12 mmol) solution in EtOH (5 ml) drop wise at 0 0C. After addition, the reaction mixture was stirred at 25 0C for 24 hours. The solvent was removed under reduced pressure and the resulted residue was purified by column chromatography (hexane : EtOAc = 5 : 1) to give the title compound as a yellow solid (0.58 g, 98%). NMR (400 MHz) 12.36 (s, IH), 10.20 (s, IH), EPO 8.54 (d, J= 8.4 Hz, IH)5 7.01 (d, J= 8.4 Hz, IH), 6.39 (d, J= 1.6 Hz, IH), 1.94 (m, IH), 0.96 (m,2 H), 0.71 (m, 2H). MS: Calcd.: 279; Found: [M+H]+ 280.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference of 175137-46-9, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 175137-46-9 as follows.

A solution of 4-chloro-2-methylsulfanyl-5, 8-dihydro-6H-pyrido [3, 4-d] pyrimidine-7- carboxylic acid benzyl ester (Method 147; 5.0 g, 14.0 mmol), triethylamine (4.3 g, 43 mmol), and5-cyclopropyl-lH-pyrazol-3-ylamine (2.6 g, 21 mmol) in NMP (30ml) was heated at 110 C for 48 hours. After cooling to25 C, the reaction was diluted with H20 (30 ml), extracted with MTBE (4 x 50 ml). The combined organic layer was dried overMgS04, concentrated, and purified by column chromatography (DCM:MeOH = 50 :1) to give the title compound (2.5 g, 40%). MS: Calcd.: 436; Found: [M+H] + 437.

According to the analysis of related databases, 175137-46-9, the application of this compound in the production field has become more and more popular.