Category: 112758-40-4

Adding a certain compound to certain chemical reactions, such as: 112758-40-4, name is 3-Methyl-1H-pyrazole-4-carbaldehyde, belongs to pyrazoles-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 112758-40-4, Application In Synthesis of 3-Methyl-1H-pyrazole-4-carbaldehyde

To a solution of 3-methyl-iH-pyrazole-4-carbaldehyde, intermediate 12 (0.33 g, 3.0 mmol) in 10 mL of THF was added 0.12 g of 60 % sodium hydride with ice bath cooling and then it was stirred for 20 minute at the same temperature. To this, was added of 10 mL solution of l-methyl-N-(4-(methansulfonyl)pyrimidin-2-yl)-iH- indazol-5-amine (0.6g, 2.0 mmol) in THF. The reaction was allowed to warm up to room temperature and then stirred for 2 hours at rt. The reaction was quenched with water, extracted with dichloromethane (x2) and washed with brine. The collected organic layers were dried over anhydrous sodium sulfate and then concentrated in vacuo. The resulting residue was solidified with heptane and then collected by filtration to afford the desired intermediate 13 as a white solid (0.45 g, 66 %

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 112758-40-4, name is 3-Methyl-1H-pyrazole-4-carbaldehyde, A new synthetic method of this compound is introduced below., Recommanded Product: 112758-40-4

To a solution of 3 -methyl- lH-pyrazole-4-carbaldehyde (1 g, 9.08 mmol) in acetonitrile (10 mL) is added potassium carbonate (1.76 g, 12.71 mmol) and 2,3- difluornitrobenzene (1.73 g, 10.90 mmol) and the mixture is stirred at room temperature overnight. Water is added and the organic phase is extracted with ethyl acetate. Organic layer is dried over sodium sulfate and the solvent evaporated under reduced pressure. The residue is purified by normal phase Isco chromatography using as eluent ethyl acetate/hexane (20-80%) to give a 62% yield of a mixture of regioisomers containing the title compound as major product that is used with no further purification. NMR is consistent with desired structure, although mixture of regiosomers is detected: NMR (MeOD): 9.98 (s, 1H), 8.65 (d, 1H, J= 1.6 Hz), 7.99-7.26 (m, 3H), 2.49 (s, 3H). A mixture of l-(2-fluoro-6-nitro-phenyl)-3 -methyl- lH-pyrazole-4-carbaldehyde (620 mg; 2.49 mmol) (as major compound in a mixture of regioisomers in the pyrazole) and Iron (1.40 g) in ethanol (5.1 mL) and water (5.1 mL) with few drops of acetic acid is heated at 90C for 2h. After that time, it is filtered over celite, and eluted with more ethanol. Mixture is concentrated under vacuum, basified with sodium bicarbonate (saturated aqueous solution) and extracted with dichloromethane. Organic layer is decanted, dried over magnesium sulfate and solvent evaporated under reduced pressure to give 500 mg of the title compound, as major product in a mixture of regioisomers in the pyrazole, that is used without further purification. MS (m/z): 220 (M+l). To a solution of l-(2-amino-6-fluoro-phenyl)-3-methyl-lH-pyrazole-4- carbaldehyde (500 mg, 2.28 mmol) (as major compound in a mixture of regioisomers in the pyrazole) in dichloromethane (15.21 mL), pyridine (553.31 muKappa) is added. Then, methyl chloroformate (194.17 mu) is added dropwise at 0C and the mixture is stirred at room temperature for 30 min. Water is added and the mixture is extracted with dichloromethane. Organic layer is decanted, dried over magnesium sulfate and solvent evaporated under reduced pressure. The residue is purified by normal phase Isco chromatography using as eluent ethyl acetate and hexane to give 418 mg of the title compound. MS (m/z): 278 (M+l). To a solution of methyl N-[3-fluoro-2-(4-formyl-3-methyl-pyrazol-l- yl)phenyl]carbamate (335 mg, 1.2 mmol) (as major compound in a mixture of regioisomers in the pyrazole) in tetrahydrofuran (6 mL) under nitrogen atmosphere and cooled to 0C, sodium hydride (60% in mineral oil) (58.3 mg) is added. Then, methyl iodide (0.4 mL) is added and the reaction mixture is stirred at 0C for 1 hour. After that time, water is added and the mixture is extracted with ethyl acetate. Organic layer is decanted, dried over sodium sulfate and solvent evaporated. The residue is purified by normal phase Isco chromatography using as eluent ethyl acetate and hexane to give 287 mg of the title compound, as major product in a mixture of regioisomers in the pyrazole, that is used without further purification. MS (m/z): 292 (M+l). To a solution of 2-chloro-4,4-difluoro-spiro[5H-thieno[2,3-c]pyran-7,4′- piperidine] (210 mg, 0.75 mmol) in dichloromethane (3.00 mL), methyl N-[3-fluoro-2-(4- formyl-3-methyl-pyrazol-l-yl)phenyl]-N-methyl-carbamate (284.27 mg) (as major compound in a mixture of regioisomers in the pyrazole) is added. The mixture is stirred 10 min at room temperature. Then, sodium triacetoxyborohydride (331.5 mg) is added, and the reaction is stirred at room temperature overnight. The mixture is diluted with dichloromethane and quenched slowly with sodium bicarbonate (saturated solution). The organic phase is then extracted with more dichloromethane, decanted, dried over magnesium sulfate and solvent evaporated under reduced pressure. The residue is purified by normal phase Isco chromatography using as eluent dichloromethane and methanol to give 160 mg of methyl N-[2-[4-[(2-chloro-4,4-difluoro-spiro[5H-thieno[2, 3-c]pyran-7,4′- piperidine]- -yl)methyl]-3-methyl-pyrazol-l-yl]-3-fluoro-phenyl]-N-methyl-carbamate. MS (m/z): 555 (M+l).The tartrate salt is essentially prepared as described in Example 1. MS (m z): 555 (M+l).

The synthetic route of 112758-40-4 has been constantly updated, and we look forward to future research findings.

Synthetic Route of 112758-40-4, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 112758-40-4, name is 3-Methyl-1H-pyrazole-4-carbaldehyde belongs to pyrazoles-derivatives compound, it is a common compound, a new synthetic route is introduced below.

To a solution of 3 -methyl- lH-pyrazole-4-carbaldehyde (1 g, 9.08 mmol) in acetonitrile (10 mL) is added potassium carbonate (1.76 g, 12.71 mmol) and 2,3- difluornitrobenzene (1.73 g, 10.90 mmol) and the mixture is stirred at room temperature overnight. Water is added and the organic phase is extracted with ethyl acetate. Organic layer is dried over sodium sulfate and the solvent evaporated under reduced pressure. The residue is purified by normal phase Isco chromatography using as eluent ethyl acetate/hexane (20-80%) to give a 62% yield of a mixture of regioisomers containing the title compound as major product that is used with no further purification. NMR is consistent with desired structure, although mixture of regiosomers is detected: NMR (MeOD): 9.98 (s, 1H), 8.65 (d, 1H, J= 1.6 Hz), 7.99-7.26 (m, 3H), 2.49 (s, 3H). A solution of 2-chloro-4,4-difluoro-spiro[5H-thieno[2,3-c]pyran-7,4′-piperidine] (2.1 g, 7.5 mmol) and l-(2-fluoro-6-nitro-phenyl)-3-methyl-pyrazole-4-carbaldehyde (3 g) (as major compound in a mixture of regioisomers in the pyrazole) in dichloromethane (47 mL) is stirred at room temperature for 30 minutes. Then, sodium triacetoxy borohydride (3.94g) is added and the mixture is stirred overnight at that temperature. The reaction mixture is quenched carefully with sodium bicarbonate (saturated solution) and extracted with dichloromethane. Organic layer is washed with brine, decanted and dried over sodium sulfate. Solvent is evaporated and the residue is purified by normal phase Isco chromatography using as eluant dichloromethane and isopropanol to give 2.28 g of 2-chloro-4,4-difluoro- -[[l-(2-fluoro-6-nitro-phenyl)-3-methyl-pyrazol-4- yl]methyl]spiro[5H-thieno[2,3-c]pyran-7,4′-piperidine] (the compound is contaminated with the other pyrazole regioisomer in a ratio 80:20). MS (m/z): 513 (M+l). To a solution of 2-chloro-4,4-difluoro-l’-[[l-(2-fluoro-6-nitro-phenyl)-3-methyl- pyrazol-4-yl]methyl]spiro[5H-thieno[2,3-c]pyran-7,4′-piperidine] (2.28g, 4.46 mmol) and iron (2.5g) in ethanol (1 lmL) and water (1 lmL), a few drops of acetic acid is added. The reaction mixture is stirred at 90C for 70 min. The mixture is then filtered over celite and concentrated under vacuum. Remained solution is basified with sodium bicarbonate(saturated solution) and extracted with dichloromethane. Organic layer is decanted, dried over sodium sulfate and solvent evaporated to obtain 1.8 g of 2-[4-[(2-chloro-4,4- difluoro-spiro[5H-thieno[2,3-c]pyran-7,4′-piperidine]- -yl)methyl]-3-methyl-pyrazol-l- yl]-3-fluoro-aniline that is used in next step without further purification (the compound is contaminated with the other pyrazole regioisomer in a ratio 80:20). MS (m/z): 483 (M+l).

The synthetic route of 3-Methyl-1H-pyrazole-4-carbaldehyde has been constantly updated, and we look forward to future research findings.

Adding a certain compound to certain chemical reactions, such as: 112758-40-4, name is 3-Methyl-1H-pyrazole-4-carbaldehyde, belongs to pyrazoles-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 112758-40-4, COA of Formula: C5H6N2O

PREPARATION 21Methyl 2-(4-formyl-3-methyl-pyrazol-1-yl)pyridine-3-carboxylate; A mixture of 3-methyl-1H-pyrazole-4-carbaldehyde (300 mg, 2.72 mmol), potassium carbonate (565 mg, 4.08 mmol), methyl 2-fluoropyridine-3-carboxylate (507 mg, 3.27 mmol) and dimethylformamide (2 mL) is stirred at 60 C. for 16 h. Water is added and the compound is extracted in ethyl acetate. The organic layer is washed with brine, dried over sodium sulfate and solvent is evaporated. The crude mixture is purified by normal phase Isco chromatography using hexane:ethyl acetate, 2:1 as eluent to yield 422 mg of the title compound. MS (m/z): 246 (M+1).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 3-Methyl-1H-pyrazole-4-carbaldehyde, other downstream synthetic routes, hurry up and to see.

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 112758-40-4, name is 3-Methyl-1H-pyrazole-4-carbaldehyde belongs to pyrazoles-derivatives compound, it is a common compound, a new synthetic route is introduced below. 112758-40-4

To a solution of 3 -methyl- lH-pyrazole-4-carbaldehyde (1 g, 9.08 mmol) in acetonitrile (10 mL) is added potassium carbonate (1.76 g, 12.71 mmol) and 2,3- difluornitrobenzene (1.73 g, 10.90 mmol) and the mixture is stirred at room temperature overnight. Water is added and the organic phase is extracted with ethyl acetate. Organic layer is dried over sodium sulfate and the solvent evaporated under reduced pressure. The residue is purified by normal phase Isco chromatography using as eluent ethyl acetate/hexane (20-80%) to give a 62% yield of a mixture of regioisomers containing the title compound as major product that is used with no further purification. NMR is consistent with desired structure, although mixture of regiosomers is detected: NMR (MeOD): 9.98 (s, 1H), 8.65 (d, 1H, J= 1.6 Hz), 7.99-7.26 (m, 3H), 2.49 (s, 3H).

The synthetic route of 112758-40-4 has been constantly updated, and we look forward to future research findings.

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 112758-40-4, name is 3-Methyl-1H-pyrazole-4-carbaldehyde, This compound has unique chemical properties. The synthetic route is as follows., 112758-40-4

3. 3-Methyl-1-(3-(tetrahydrofuran-2-yl)pyridin-2-yl)-1H-pyrazole-4-carbaldehyde; To a screw-cap test tube containing 2-fluoro-3-(tetrahydrofuran-2-yl)pyridine (148 mg, 0.88 mmol) in dimethylformamide (2.2 mL) are added 3-methyl-1H-pyrazole-4-carbaldehyde (81 mg, 0.74 mmol) and potassium carbonate (152 mg, 1.1 mmol). The reaction tube is quickly sealed (caution: build-up of pressure possible; use a safety shield) and stirred in a preheated oil bath at 110 C. for 18 h with the aid of a magnetic stirrer. The mixture is diluted with water and extracted with ethyl acetate. The organic layer is separated, dried over magnesium sulfate, filtered and the solvent evaporated in vacuo. The resulting residue is purified by silica gel using normal phase Isco chromatography eluting with hexane: acetone (gradient from 5 to 20% in acetone) to give 116 mg of the title compound. MS (m/z): 258 (M+1).

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 112758-40-4, name is 3-Methyl-1H-pyrazole-4-carbaldehyde belongs to pyrazoles-derivatives compound, it is a common compound, a new synthetic route is introduced below. 112758-40-4

To a solution of 3 -methyl- lH-pyrazole-4-carbaldehyde (1 g, 9.08 mmol) in acetonitrile (10 mL) is added potassium carbonate (1.76 g, 12.71 mmol) and 2,3- difluornitrobenzene (1.73 g, 10.90 mmol) and the mixture is stirred at room temperature overnight. Water is added and the organic phase is extracted with ethyl acetate. Organic layer is dried over sodium sulfate and the solvent evaporated under reduced pressure. The residue is purified by normal phase Isco chromatography using as eluent ethyl acetate/hexane (20-80%) to give a 62% yield of a mixture of regioisomers containing the title compound as major product that is used with no further purification. NMR is consistent with desired structure, although mixture of regiosomers is detected: NMR (MeOD): 9.98 (s, 1H), 8.65 (d, 1H, J= 1.6 Hz), 7.99-7.26 (m, 3H), 2.49 (s, 3H). A mixture of l-(2-fluoro-6-nitro-phenyl)-3 -methyl- lH-pyrazole-4-carbaldehyde (620 mg; 2.49 mmol) (as major compound in a mixture of regioisomers in the pyrazole) and Iron (1.40 g) in ethanol (5.1 mL) and water (5.1 mL) with few drops of acetic acid is heated at 90C for 2h. After that time, it is filtered over celite, and eluted with more ethanol. Mixture is concentrated under vacuum, basified with sodium bicarbonate (saturated aqueous solution) and extracted with dichloromethane. Organic layer is decanted, dried over magnesium sulfate and solvent evaporated under reduced pressure to give 500 mg of the title compound, as major product in a mixture of regioisomers in the pyrazole, that is used without further purification. MS (m/z): 220 (M+l).

The synthetic route of 112758-40-4 has been constantly updated, and we look forward to future research findings.