Category: 120068-79-3

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 120068-79-3 as follows. SDS of cas: 120068-79-3

Comparative Example 13; [0123] Direct sulfinylation of N-phenyl pyrazole starting material (III) according to known methods was tested. As such, sulfinylation was attempted using CF3SO2Na in the presence of a halogenating agent such as POCl3, SOCl2 or PBr3. (III) (II)The reaction reagents and conditions tested are provided in Table I below. Table IUl The results are provided in Table II below: Table II[0124] The reaction proceeded to the desired product, Fipronil, when SOCl2 or POCl3 were used as halogenating agents. However, PBr3 did not yield the desired product, or at least not in acceptable yield (about 6%~8% (II) in the reaction mixture, according to HPLC).

According to the analysis of related databases, 120068-79-3, the application of this compound in the production field has become more and more popular.

Adding a certain compound to certain chemical reactions, such as: 120068-79-3, name is 5-Amino-1-(2,6-dichloro-4-(trifluoromethyl)phenyl)-1H-pyrazole-3-carbonitrile, belongs to pyrazoles-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 120068-79-3, Safety of 5-Amino-1-(2,6-dichloro-4-(trifluoromethyl)phenyl)-1H-pyrazole-3-carbonitrile

General procedure: Phenylpyrazole (0.2 mmol), arylboronic acid (0.4 mmol), NIS (0.2 mmol), [Pd] (10 mol%), NaHCO3 (0.4 mmol) and C2H5OH:H2O (3:1, 10 mL), were added to a Schlenk tube. Then the tube was charged with N2 and the reaction mixture was stirred at 80 C for 18 h. After the completion of the reaction, as monitored by TLC, the mixture was cooled and filtrated. The filtrate was extracted with ethyl acetate and washed with brine. Then the combined organic extracts were dried over Na2SO4, concentrated under vacuum and the resulting residue was purified by silica gel column chromatography to afford the desired products.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Application of 120068-79-3,Some common heterocyclic compound, 120068-79-3, name is 5-Amino-1-(2,6-dichloro-4-(trifluoromethyl)phenyl)-1H-pyrazole-3-carbonitrile, molecular formula is C11H5Cl2F3N4, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Further comparative experiments are conducted employing the following preparation procedure; To a 750 ml reactor with a mechanical stirrer and a thermometer containing the amine acid complex (1.5 eq.), 147 g anhydrous toluene (6.5 eq.), and 44.8 g CF3SOCI (1.2 eq.) under an argon atmosphere at 0 0C was added vacuum dried 5-amino-1-(2,6- dichloro-4-trifluoromethyl-phenyl)-1 H-pyrazole-3-carbonitrile (1 eq., 79.5 g, 245 mmol, 99 % purity). The reaction mixture was kept at 5 0C for 60 min and then heated to 35 0C within 45 min. The temperature of 35 0C was kept for another 10 hours before quenching the reaction with 200 g of sodium hydroxide solution (10 wt.%). The resulting suspension was diluted with 176 ml of ethylacetate. After phase separation the organic layer was washed once with sodium hydroxide solution (10 wt.%). After phase separation, the organic layer was analyzed by quantitative HPLC. The product was crystallized from a mixture of ethylacetate and toluene affording the title compound as a white crystalline powder.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 5-Amino-1-(2,6-dichloro-4-(trifluoromethyl)phenyl)-1H-pyrazole-3-carbonitrile, its application will become more common.

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 120068-79-3, name is 5-Amino-1-(2,6-dichloro-4-(trifluoromethyl)phenyl)-1H-pyrazole-3-carbonitrile belongs to pyrazoles-derivatives compound, it is a common compound, a new synthetic route is introduced below. Recommanded Product: 120068-79-3

Example E4 5-Amino-3-cyano-4-(cyclohex-1-enyl)-1-(2,6-dichloro-4-trifluoromethylphenyl)pyrazole A solution of 5-amino-3-cyano-1-(2,6-dichloro-4-trifluoromethylphenyl) pyrazole (1 g, the compound of Reference Example 1 from EP 295,117) and cyclohexanone (1.6 ml) in acetic acid (5 ml) was stirred and heated at 120 C. overnight under an atmosphere of nitrogen. The cooled reaction mixture was diluted with water and extracted with ethyl acetate and then ether. The combined organic extracts were washed with saturated aqueous sodium hydrogen carbonate solution, then water. After drying (MgSO4), evaporation gave the crude product which was purified by column chromatography on silica gel (50 g) eluted with dichloromethane:hexane (1:2), then dichloromethane:hexane (1:1). Combination and evaporation of appropriate fractions provided the title compound as a white solid m.p. 175-7 C. 1H-NMR (CDCl3) delta: 1.7 (m, 2H), 1.8 (m,2H), 2,2 (m, 2H), 2.45 (m, 2H), 3.74 (s, 2H), 5.9 (s, 1H), 7.78 (s, 2H) Microanalysis-found: C, 50.75, H. 3.07, N, 13.68%; C17H13Cl2F3N4 requires C,50.89, H, 3.27, N, 13.96%

The synthetic route of 120068-79-3 has been constantly updated, and we look forward to future research findings.

Related Products of 120068-79-3, A common heterocyclic compound, 120068-79-3, name is 5-Amino-1-(2,6-dichloro-4-(trifluoromethyl)phenyl)-1H-pyrazole-3-carbonitrile, molecular formula is C11H5Cl2F3N4, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Example 1; Sulfinylation of 5-amino-1-[2,6-dichloro-4-(trifluoromethyl)phenyl]-1 H- pyrazole-3-carbonitrile with triethylamine hydrochloride, sodium trifluoromethylsulfinate and thionylchloride, in 6.5 molar equivalents of tolueneWithin a 3-neck, 50 ml. round bottom flask equipped with a magnetic stirrer bar and a thermometer were placed vacuum dried sodium trifluoromethylsulfinate (4.29 g, 27.5 mmol), vacuum dried triethylamine hydrochloride (5.16 g, 37.5 mmol), and 13 ml. an- hydrous toluene (6.5 molar equivalents relative to 5-amino-1-[2,6-dichloro-4-(trifluoromethyl)phenyl]-1 H-pyrazole-3-carbonitrile) under an argon atmosphere. After cooling to 00C to 5 0C with an ice bath, thionylchloride (3.57 g, 30 mmol) was added slowly while keeping the reaction temperature below 5 0C. After stirring for another 30 min, vacuum dried 5-amino-1-(2,6-dichloro-4-trifluoromethyl-phenyl)-1 H-pyrazole-3- carbonitrile (8.03 g, 25 mmol, 99 % purity) was added at 5 0C, and the reaction mixture was heated to 50 0C within 5 min by a preheated water bath. The temperature of 50 0C was kept for another 6 hours before quenching the reaction with 50 ml. of saturated NaHCO3 solution. The resulting suspension was diluted with 30 ml. of ethylacetate. After phase separa- tion the organic layer was washed once with saturated NaHCtheta3 solution and concentrated under reduced pressure until dryness. The crude product was crystallized from refluxing toluene (100 g) affording the title compound as a white crystalline powder (8.06 g, 70 % yield, 94 % purity by quantitative HPLC). 1H-NMR (Bruker DRX-500, d6- DMSO): delta [ppm]: 8.33 (s), 7.57 (s).; Example 17; Sulfinylation of 5-amino-1-[2,6-dichloro-4-(trifluoromethyl)phenyl]-1 H-pyrazole-3- carbonitrile with triethylamine tosylate, sodium trifluoromethylsulfinate and thionylchlo- ride, in 6.5 molar equivalents of tolueneThe preparation procedure was conducted as described above for example 1. The crude product was crystallized from refluxing toluene (100 g) affording the title compound as a white crystalline powder (44 % yield, 76 % purity by quantitative HPLC). No formation of insoluble material (as with diethylamine tosylate as the amine acid complex, compare example C4 of Table 3) was observed.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Electric Literature of 120068-79-3, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 120068-79-3 name is 5-Amino-1-(2,6-dichloro-4-(trifluoromethyl)phenyl)-1H-pyrazole-3-carbonitrile, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

REFERENCE EXAMPLE 1 A solution of 5-amino-3-cyano-1-(2,6-dichloro-4-trifluoromethylphenyl)pyrazole (20.0g) in dichloromethane (100ml) was stirred magnetically and treated dropwise with a solution of trifluoromethylsulphenyl chloride (10.8g) in dichloromethane (50ml) during 1 hour. The solution was stirred overnight at room temperature, then washed with water (100ml), dried over anhydrous magnesium sulphate, filtered, and evaporated in vacuo to give a solid (26.3g). This solid was recrystallized from toluene/hexane to give 5-amino-3-cyano-1-(2,6-dichloro4-trifluoromethylphenyl)-4-trifluoromethylthiopyrazole as fawn crystals (24.2g) m.p. 169-171C.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 5-Amino-1-(2,6-dichloro-4-(trifluoromethyl)phenyl)-1H-pyrazole-3-carbonitrile, and friends who are interested can also refer to it.

Adding a certain compound to certain chemical reactions, such as: 120068-79-3, name is 5-Amino-1-(2,6-dichloro-4-(trifluoromethyl)phenyl)-1H-pyrazole-3-carbonitrile, belongs to pyrazoles-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 120068-79-3, Formula: C11H5Cl2F3N4

General procedure: A mixture of compound A (5 mmol) and corresponding benzaldehyde (5 mmol) in 10 mL ethanol was refluxed for 24 hours in a reaction flask wrapped up by silver paper. Upon the reactions completed (monitored by TLC), tawny solids were obtained through suction filtration. The precipitates were washed with ethanol (5 mLx3) and recrystallized from ethanol with 50-84% yields.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 5-Amino-1-(2,6-dichloro-4-(trifluoromethyl)phenyl)-1H-pyrazole-3-carbonitrile, other downstream synthetic routes, hurry up and to see.

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 120068-79-3 as follows. Application In Synthesis of 5-Amino-1-(2,6-dichloro-4-(trifluoromethyl)phenyl)-1H-pyrazole-3-carbonitrile

General procedure: A mixture of compound A (5 mmol) and corresponding benzaldehyde (5 mmol) in 10 mL ethanol was refluxed for 24 hours in a reaction flask wrapped up by silver paper. Upon the reactions completed (monitored by TLC), tawny solids were obtained through suction filtration. The precipitates were washed with ethanol (5 mLx3) and recrystallized from ethanol with 50-84% yields.

According to the analysis of related databases, 120068-79-3, the application of this compound in the production field has become more and more popular.

Some common heterocyclic compound, 120068-79-3, name is 5-Amino-1-(2,6-dichloro-4-(trifluoromethyl)phenyl)-1H-pyrazole-3-carbonitrile, molecular formula is C11H5Cl2F3N4, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. 120068-79-3

Example 1; Sulfinylation of 5-amino-1-[2,6-dichloro-4-(trifluoromethyl)phenyl]-1 H- pyrazole-3-carbonitrile with triethylamine hydrochloride, sodium trifluoromethylsulfinate and thionylchloride, in 6.5 molar equivalents of tolueneWithin a 3-neck, 50 ml. round bottom flask equipped with a magnetic stirrer bar and a thermometer were placed vacuum dried sodium trifluoromethylsulfinate (4.29 g, 27.5 mmol), vacuum dried triethylamine hydrochloride (5.16 g, 37.5 mmol), and 13 ml. an- hydrous toluene (6.5 molar equivalents relative to 5-amino-1-[2,6-dichloro-4-(trifluoromethyl)phenyl]-1 H-pyrazole-3-carbonitrile) under an argon atmosphere. After cooling to 00C to 5 0C with an ice bath, thionylchloride (3.57 g, 30 mmol) was added slowly while keeping the reaction temperature below 5 0C. After stirring for another 30 min, vacuum dried 5-amino-1-(2,6-dichloro-4-trifluoromethyl-phenyl)-1 H-pyrazole-3- carbonitrile (8.03 g, 25 mmol, 99 % purity) was added at 5 0C, and the reaction mixture was heated to 50 0C within 5 min by a preheated water bath. The temperature of 50 0C was kept for another 6 hours before quenching the reaction with 50 ml. of saturated NaHCO3 solution. The resulting suspension was diluted with 30 ml. of ethylacetate. After phase separa- tion the organic layer was washed once with saturated NaHCtheta3 solution and concentrated under reduced pressure until dryness. The crude product was crystallized from refluxing toluene (100 g) affording the title compound as a white crystalline powder (8.06 g, 70 % yield, 94 % purity by quantitative HPLC). 1H-NMR (Bruker DRX-500, d6- DMSO): delta [ppm]: 8.33 (s), 7.57 (s).; Example 12; Sulfinylation of 5-amino-1-[2,6-dichloro-4-(trifluoromethyl)phenyl]-1 H-pyrazole-3- carbonitrile with trimethylamine tosylate, sodium trifluoromethylsulfinate and thionyl- chloride, in 6.5 molar equivalents of tolueneThe preparation procedure was conducted as described above for example 1. The crude product was crystallized from refluxing toluene (100 g) affording the title compound as a white crystalline powder (76 % yield, 96 % purity by quantitative HPLC).; Example 14; Sulfinylation of 5-amino-1-[2,6-dichloro-4-(trifluoromethyl)phenyl]-1 H- pyrazole-3-carbonitrile with trimethylamine tosylate, sodium trifluoromethylsulfinate and thionylchloride, in 6.5 molar equivalents of tolueneThe preparation procedure was conducted as described above for example 11. The crude product was crystallized from refluxing toluene (100 g) affording the title com- pound as a white crystalline powder (73 % yield, 98 % purity by quantitative HPLC).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 120068-79-3, its application will become more common.

120068-79-3, A common compound: 120068-79-3, name is 5-Amino-1-(2,6-dichloro-4-(trifluoromethyl)phenyl)-1H-pyrazole-3-carbonitrile, belongs to pyrazoles-derivatives compound, it can change the direction of chemical reaction, and react with certain compounds to generate new functional products. A new synthetic method of this compound is introduced below.

Example 1; Sulfinylation of 5-amino-1-[2,6-dichloro-4-(trifluoromethyl)phenyl]-1 H- pyrazole-3-carbonitrile with triethylamine hydrochloride, sodium trifluoromethylsulfinate and thionylchloride, in 6.5 molar equivalents of tolueneWithin a 3-neck, 50 ml. round bottom flask equipped with a magnetic stirrer bar and a thermometer were placed vacuum dried sodium trifluoromethylsulfinate (4.29 g, 27.5 mmol), vacuum dried triethylamine hydrochloride (5.16 g, 37.5 mmol), and 13 ml. an- hydrous toluene (6.5 molar equivalents relative to 5-amino-1-[2,6-dichloro-4-(trifluoromethyl)phenyl]-1 H-pyrazole-3-carbonitrile) under an argon atmosphere. After cooling to 00C to 5 0C with an ice bath, thionylchloride (3.57 g, 30 mmol) was added slowly while keeping the reaction temperature below 5 0C. After stirring for another 30 min, vacuum dried 5-amino-1-(2,6-dichloro-4-trifluoromethyl-phenyl)-1 H-pyrazole-3- carbonitrile (8.03 g, 25 mmol, 99 % purity) was added at 5 0C, and the reaction mixture was heated to 50 0C within 5 min by a preheated water bath. The temperature of 50 0C was kept for another 6 hours before quenching the reaction with 50 ml. of saturated NaHCO3 solution. The resulting suspension was diluted with 30 ml. of ethylacetate. After phase separa- tion the organic layer was washed once with saturated NaHCtheta3 solution and concentrated under reduced pressure until dryness. The crude product was crystallized from refluxing toluene (100 g) affording the title compound as a white crystalline powder (8.06 g, 70 % yield, 94 % purity by quantitative HPLC). 1H-NMR (Bruker DRX-500, d6- DMSO): delta [ppm]: 8.33 (s), 7.57 (s).; Example 2; Sulfinylation of 5-amino-1-[2,6-dichloro-4-(trifluoromethyl)phenyl]-1 H- pyrazole-3-carbonitrile with triethylamine hydrochloride, potassium trifluoromethylsulfinate and thionylchlorideWithin a 3-neck, 50 ml. round bottom flask equipped with a magnetic stirrer bar and a thermometer were placed vacuum dried potassium trifluoromethylsulfinate (4.73 g, 27.5 mmol), vacuum dried triethylamine hydrochloride (5.16 g, 37.5 mmol), thionylchloride (3.57 g, 30 mmol), and 15 ml. anhydrous toluene under an argon atmosphere. The reaction is further conducted as described above for example 1. EPO The crude product was crystallized from refluxing chlorobenzene (100 g) affording the title compound as a white crystalline powder (7.44 g, 66 % yield, 96 % purity by quantitative HPLC). 1H-NMR (Bruker DRX-500, d6-DMSO): delta [ppm]: 8.33 (s), 7.57 (s).; Example 10; Sulfinylation of 5-amino-1-[2,6-dichloro-4-(trifluoromethyl)phenyl]-1 H- pyrazole-3-carbonitrile with triethylamine hydrochloride, potassium trifluoromethylsulfinate and thionylchloride, in 4.5 molar equivalents of tolueneWithin a 3-neck, 50 mL round bottom flask equipped with a magnetic stirrer bar and a thermometer were placed vacuum dried potassium trifluoromethylsulfinate (5.16 g, 30 mmol), vacuum dried triethylamine hydrochloride (5.16 g, 37.5 mmol), and 10.4 g anhydrous toluene (4.5 molar equivalents relative to 5-amino-1-[2,6-dichloro-4- (trifluoromethyl)phenyl]-1 H-pyrazole-3-carbonitrile) under an argon atmosphere. After cooling to 00C to 5 0C with external cooling, thionylchloride (3.57 g, 30 mmol) was EPO added within 15 min while keeping the reaction temperature below 5 0C. After stirring for another 30 min, vacuum dried 5-amino-1-(2,6-dichloro-4-trifluoromethyl-phenyl)-1 H- pyrazole-3-carbonitrile (8.03 g, 25 mmol, 99 % purity) was added at 5 0C, and the reaction mixture was kept at 5 0C for 60 min and then heated to 35 0C within 45 min. The temperature of 35 0C was kept for 3 hours before adding 4.6 g of toluene. After another 7 hours at 35 0C the reaction was quenched with 20 g of sodium hydroxide solution (10 wt.%).The resulting suspension was diluted with 30 ml. of ethylacetate. After phase separation the organic layer was washed once with sodium hydroxide solution (10 wt.%). After phase separation, the organic layer was analyzed by quantitative HPLC (80.4 % yield). The crude product was crystallized from a mixture of ethylacetate and toluene affording the title compound as a white crystalline powder (7.98 g, 73 % yield, 98 % purity by quantitative HPLC).; Example 11; Sulfinylation of 5-amino-1 -[2,6-dichloro-4-(trifluoromethyl)phenyl]-1 H- pyrazole-3-carbonitrile with thionylchloride, triethylamine hydrochloride and dosage of potassium trifluoromethylsulfinateWithin a 750 mL reactor with a mechanical stirrer and a thermometer were placed vac- uum dried triethylamine hydrochloride (51.1 g, 368 mmol), 147 g anhydrous toluene(6.5 molar equivalents relative to 5-amino-1-[2,6-dichloro-4-(trifluoromethyl)phenyl]-1 H- pyrazole-3-carbonitrile), and thionylchloride (35.7 g, 294 mmol) under an argon atmosphere. After cooling to 00C to 5 0C with external cooling, vacuum dried potassium trifluoromethylsulfinate (50.4 g, 296 mmol) was added in three equal portions every 10 min while keeping the reaction temperature be…

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 5-Amino-1-(2,6-dichloro-4-(trifluoromethyl)phenyl)-1H-pyrazole-3-carbonitrile, other downstream synthetic routes, hurry up and to see.