Category: 120068-79-3

Related Products of 120068-79-3, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 120068-79-3, name is 5-Amino-1-(2,6-dichloro-4-(trifluoromethyl)phenyl)-1H-pyrazole-3-carbonitrile belongs to pyrazoles-derivatives compound, it is a common compound, a new synthetic route is introduced below.

Comparative Example 13; [0123] Direct sulfinylation of N-phenyl pyrazole starting material (III) according to known methods was tested. As such, sulfinylation was attempted using CF3SO2Na in the presence of a halogenating agent such as POCl3, SOCl2 or PBr3. (III) (II)The reaction reagents and conditions tested are provided in Table I below. Table IUl The results are provided in Table II below: Table II[0124] The reaction proceeded to the desired product, Fipronil, when SOCl2 or POCl3 were used as halogenating agents. However, PBr3 did not yield the desired product, or at least not in acceptable yield (about 6%~8% (II) in the reaction mixture, according to HPLC).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 5-Amino-1-(2,6-dichloro-4-(trifluoromethyl)phenyl)-1H-pyrazole-3-carbonitrile, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; VETOQUINOL; WO2009/77853; (2009); A1;,
Pyrazole – Wikipedia,
Pyrazoles – an overview | ScienceDirect Topics

120068-79-3, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 120068-79-3 as follows.

Further comparative experiments are conducted employing the following preparation procedure; To a 750 ml reactor with a mechanical stirrer and a thermometer containing the amine acid complex (1.5 eq.), 147 g anhydrous toluene (6.5 eq.), and 44.8 g CF3SOCI (1.2 eq.) under an argon atmosphere at 0 0C was added vacuum dried 5-amino-1-(2,6- dichloro-4-trifluoromethyl-phenyl)-1 H-pyrazole-3-carbonitrile (1 eq., 79.5 g, 245 mmol, 99 % purity). The reaction mixture was kept at 5 0C for 60 min and then heated to 35 0C within 45 min. The temperature of 35 0C was kept for another 10 hours before quenching the reaction with 200 g of sodium hydroxide solution (10 wt.%). The resulting suspension was diluted with 176 ml of ethylacetate. After phase separation the organic layer was washed once with sodium hydroxide solution (10 wt.%). After phase separation, the organic layer was analyzed by quantitative HPLC. The product was crystallized from a mixture of ethylacetate and toluene affording the title compound as a white crystalline powder.

According to the analysis of related databases, 5-Amino-1-(2,6-dichloro-4-(trifluoromethyl)phenyl)-1H-pyrazole-3-carbonitrile, the application of this compound in the production field has become more and more popular.

Reference:
Patent; BASF SE; WO2008/55877; (2008); A1;,
Pyrazole – Wikipedia,
Pyrazoles – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 120068-79-3, name is 5-Amino-1-(2,6-dichloro-4-(trifluoromethyl)phenyl)-1H-pyrazole-3-carbonitrile, belongs to pyrazoles-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 120068-79-3, COA of Formula: C11H5Cl2F3N4

EXAMPLE 6 Use of Trifluoromethanesulfinic Acid Prepared in Accordance with the Invention for Synthesis of Fipronil A 500 ml jacketed reactor with stirrer, baffles and condenser was initially charged under a nitrogen atmosphere with 103 g of ethylbenzene, 6.3 g of dimethylisopropylamine hydrochloride (0.050 mol, 99%) and 15.5 g of potassium chloride (0.208 mmol). Subsequently, 31.5 g of trifluoromethanesulfinic acid (0.223 mol, 95.0%), 17.9 g of dimethylisopropylamine (0.203 mol, 99%) and 24.2 g of thionyl chloride (203 mmol, 99.7%) were metered in at 0 C. with cooling. After subsequently adding 54.8 g of 5-amino-3-cyano-1-(2,6-dichlor-4-trifluoromethylphenyl)pyrazole, the reaction mixture was stirred at 0 C. for 1 h, then heated to 35 C. over 45 min and stirred at 35 C. for a further 10 h. After the reaction had been quenched with sodium hydroxide solution and extracted with ethyl acetate and ethylbenzene, a nonisolated yield of fipronil of 80% was obtained in the crude solution (determination by means of quantitative HPLC).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 5-Amino-1-(2,6-dichloro-4-(trifluoromethyl)phenyl)-1H-pyrazole-3-carbonitrile, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; BASF SE; US2011/190510; (2011); A1;,
Pyrazole – Wikipedia,
Pyrazoles – an overview | ScienceDirect Topics

Reference of 120068-79-3,Some common heterocyclic compound, 120068-79-3, name is 5-Amino-1-(2,6-dichloro-4-(trifluoromethyl)phenyl)-1H-pyrazole-3-carbonitrile, molecular formula is C11H5Cl2F3N4, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Example 1; Sulfinylation of 5-amino-1-[2,6-dichloro-4-(trifluoromethyl)phenyl]-1 H- pyrazole-3-carbonitrile with triethylamine hydrochloride, sodium trifluoromethylsulfinate and thionylchloride, in 6.5 molar equivalents of tolueneWithin a 3-neck, 50 ml. round bottom flask equipped with a magnetic stirrer bar and a thermometer were placed vacuum dried sodium trifluoromethylsulfinate (4.29 g, 27.5 mmol), vacuum dried triethylamine hydrochloride (5.16 g, 37.5 mmol), and 13 ml. an- hydrous toluene (6.5 molar equivalents relative to 5-amino-1-[2,6-dichloro-4-(trifluoromethyl)phenyl]-1 H-pyrazole-3-carbonitrile) under an argon atmosphere. After cooling to 00C to 5 0C with an ice bath, thionylchloride (3.57 g, 30 mmol) was added slowly while keeping the reaction temperature below 5 0C. After stirring for another 30 min, vacuum dried 5-amino-1-(2,6-dichloro-4-trifluoromethyl-phenyl)-1 H-pyrazole-3- carbonitrile (8.03 g, 25 mmol, 99 % purity) was added at 5 0C, and the reaction mixture was heated to 50 0C within 5 min by a preheated water bath. The temperature of 50 0C was kept for another 6 hours before quenching the reaction with 50 ml. of saturated NaHCO3 solution. The resulting suspension was diluted with 30 ml. of ethylacetate. After phase separa- tion the organic layer was washed once with saturated NaHCtheta3 solution and concentrated under reduced pressure until dryness. The crude product was crystallized from refluxing toluene (100 g) affording the title compound as a white crystalline powder (8.06 g, 70 % yield, 94 % purity by quantitative HPLC). 1H-NMR (Bruker DRX-500, d6- DMSO): delta [ppm]: 8.33 (s), 7.57 (s).; Comparative Examples; In order to demonstrate the advantages of the inventive process, the following examples are conducted employing the preparation procedure given above for example 1.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 5-Amino-1-(2,6-dichloro-4-(trifluoromethyl)phenyl)-1H-pyrazole-3-carbonitrile, its application will become more common.

Reference:
Patent; BASF SE; WO2008/55877; (2008); A1;,
Pyrazole – Wikipedia,
Pyrazoles – an overview | ScienceDirect Topics

Synthetic Route of 120068-79-3,Some common heterocyclic compound, 120068-79-3, name is 5-Amino-1-(2,6-dichloro-4-(trifluoromethyl)phenyl)-1H-pyrazole-3-carbonitrile, molecular formula is C11H5Cl2F3N4, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: A mixture of compound A (5 mmol) and corresponding benzaldehyde (5 mmol) in 10 mL ethanol was refluxed for 24 hours in a reaction flask wrapped up by silver paper. Upon the reactions completed (monitored by TLC), tawny solids were obtained through suction filtration. The precipitates were washed with ethanol (5 mLx3) and recrystallized from ethanol with 50-84% yields.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 5-Amino-1-(2,6-dichloro-4-(trifluoromethyl)phenyl)-1H-pyrazole-3-carbonitrile, its application will become more common.

Reference:
Letter; Li, Guanglong; Zhou, Cong; Zhu, Chengchun; He, Lujue; Li, Xiaoyang; Xu, Zhiping; Xu, Xiaoyong; Shao, Xusheng; Li, Zhong; Cheng, Jiagao; Letters in drug design and discovery; vol. 16; 10; (2019); p. 1175 – 1180;,
Pyrazole – Wikipedia,
Pyrazoles – an overview | ScienceDirect Topics

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 120068-79-3 as follows. name: 5-Amino-1-(2,6-dichloro-4-(trifluoromethyl)phenyl)-1H-pyrazole-3-carbonitrile

General procedure: A mixture of compound A (5 mmol) and corresponding benzaldehyde (5 mmol) in 10 mL ethanol was refluxed for 24 hours in a reaction flask wrapped up by silver paper. Upon the reactions completed (monitored by TLC), tawny solids were obtained through suction filtration. The precipitates were washed with ethanol (5 mLx3) and recrystallized from ethanol with 50-84% yields.

According to the analysis of related databases, 120068-79-3, the application of this compound in the production field has become more and more popular.

Reference:
Letter; Li, Guanglong; Zhou, Cong; Zhu, Chengchun; He, Lujue; Li, Xiaoyang; Xu, Zhiping; Xu, Xiaoyong; Shao, Xusheng; Li, Zhong; Cheng, Jiagao; Letters in drug design and discovery; vol. 16; 10; (2019); p. 1175 – 1180;,
Pyrazole – Wikipedia,
Pyrazoles – an overview | ScienceDirect Topics

Reference of 120068-79-3, A common heterocyclic compound, 120068-79-3, name is 5-Amino-1-(2,6-dichloro-4-(trifluoromethyl)phenyl)-1H-pyrazole-3-carbonitrile, molecular formula is C11H5Cl2F3N4, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

0.01 mol of 5-amino-1-(2,6-dichloro-4-trifluoromethyl)-3-cyano-1H-pyrazole was added to a four-necked flask.Heated to 90 C,3-(2-chloro-3,3,3-trifluoro-1-propenyl)-2,2-dimethylcyclopropane formyl isocyanate 0.01 mol and 5 ml of toluene solution were added dropwise.The reaction was refluxed for 5 h.After the reaction is completed, the crystals are cooled and filtered, and filtered.The filter cake was recrystallized from ethanol to give the product 4.82 g. The yield was 81.9%.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; Nanjing Tech University; Wan Rong; Qin Xiaofei; Shen Chen; Guo Chunwei; Wu Shaohua; Han Zhenyu; Chen Fuli; (9 pag.)CN104829538; (2018); B;,
Pyrazole – Wikipedia,
Pyrazoles – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 120068-79-3, name is 5-Amino-1-(2,6-dichloro-4-(trifluoromethyl)phenyl)-1H-pyrazole-3-carbonitrile, belongs to pyrazoles-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 120068-79-3, Recommanded Product: 120068-79-3

Example 11; Sulfinylation of 5-amino-1 -[2,6-dichloro-4-(trifluoromethyl)phenyl]-1 H- pyrazole-3-carbonitrile with thionylchloride, triethylamine hydrochloride and dosage of potassium trifluoromethylsulfinateWithin a 750 mL reactor with a mechanical stirrer and a thermometer were placed vac- uum dried triethylamine hydrochloride (51.1 g, 368 mmol), 147 g anhydrous toluene(6.5 molar equivalents relative to 5-amino-1-[2,6-dichloro-4-(trifluoromethyl)phenyl]-1 H- pyrazole-3-carbonitrile), and thionylchloride (35.7 g, 294 mmol) under an argon atmosphere. After cooling to 00C to 5 0C with external cooling, vacuum dried potassium trifluoromethylsulfinate (50.4 g, 296 mmol) was added in three equal portions every 10 min while keeping the reaction temperature below 5 0C. After stirring for another 30 min, vacuum dried 5-amino-1-(2,6-dichloro-4-trifluoromethyl-phenyl)-1 H-pyrazole-3- carbonitrile (79.5 g, 245 mmol, 99 % purity) was added at 5 0C, and the reaction mixture was kept at 5 0C for 60 min and then heated to 35 0C within 45 min. The temperature of 35 0C was kept for another 10 hours before quenching the reaction with 200 g of sodium hydroxide solution (10 wt.%).The resulting suspension was diluted with 176 mL of ethylacetate. After phase separation the organic layer was washed once with sodium hydroxide solution (10 wt.%). After phase separation, the organic layer was analyzed by quantitative HPLC (79 % yield). The content of compound F was below 2.9 weight percent in the crude mixture (without solvent). The product was crystallized from a mixture of ethylacetate and toluene affording the title compound as a white crystalline powder (77.1 g, 75 % yield, 98 % purity by quantitative HPLC).; These experiments Ca and Cb where compared to examples 18 and 19, which were conducted as described above for example 11 , employing potassium trifluoromethyl- sulfinate / pyridine hydrochloride / SOCb and potassium trifluoromethylsulfinate / trimethylamine hydrochloride / SOCb as reagents.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 5-Amino-1-(2,6-dichloro-4-(trifluoromethyl)phenyl)-1H-pyrazole-3-carbonitrile, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; BASF SE; WO2008/55877; (2008); A1;,
Pyrazole – Wikipedia,
Pyrazoles – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 120068-79-3, name is 5-Amino-1-(2,6-dichloro-4-(trifluoromethyl)phenyl)-1H-pyrazole-3-carbonitrile, A new synthetic method of this compound is introduced below., Computed Properties of C11H5Cl2F3N4

EXAMPLE 4 Production of N-[3-cyano-1-(2,6-dichloro-4-trifluoromethylphenyl)pyrazole-5-yl]pyrazine-2-carboxamide Into a mixture of 0.5 g (1.6 mmol) of 5-amino-1-(2,6-dichloro-4-trifluoromethylphenyl)pyrazole-3-carbonitrile, 0.24 g (1.7 mmol) of methyl pyrazinecarboxylate, and 0.5 ml of acetonitrile was gradually added 0.3 g (1.6 mmol) of 28% CH3ONa/CH3OH at room temperature. After 2 hours of stirring at room temperature, 5 ml of water and then concentrated hydrochloric acid were added thereto to make the mixture pH 2, whereby crystals were precipitated. Thereto was added 10 ml of ethyl acetate, followed by extraction. The organic layer was washed with saturated saline and then dried over anhydrous sodium sulfate. After removal of the sodium sulfate by filtration, the layer was concentrated and the resulting crystals were filtrated. The crystals were washed with a small amount of hexane and ethyl acetate and the dried to obtain 0.5 g (yield 77%) of N-[3-cyano-1-(2,6-dichloro-4-trifluoromethylphenyl)pyrazole-5-yl]pyrazine-2-carboxamide.

The synthetic route of 120068-79-3 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; MITSUBISHI CHEMICAL CORPORATION; US2003/60471; (2003); A1;,
Pyrazole – Wikipedia,
Pyrazoles – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 120068-79-3, name is 5-Amino-1-(2,6-dichloro-4-(trifluoromethyl)phenyl)-1H-pyrazole-3-carbonitrile, A new synthetic method of this compound is introduced below., Computed Properties of C11H5Cl2F3N4

EXAMPLE 4 Production of N-[3-cyano-1-(2,6-dichloro-4-trifluoromethylphenyl)pyrazole-5-yl]pyrazine-2-carboxamide Into a mixture of 0.5 g (1.6 mmol) of 5-amino-1-(2,6-dichloro-4-trifluoromethylphenyl)pyrazole-3-carbonitrile, 0.24 g (1.7 mmol) of methyl pyrazinecarboxylate, and 0.5 ml of acetonitrile was gradually added 0.3 g (1.6 mmol) of 28% CH3ONa/CH3OH at room temperature. After 2 hours of stirring at room temperature, 5 ml of water and then concentrated hydrochloric acid were added thereto to make the mixture pH 2, whereby crystals were precipitated. Thereto was added 10 ml of ethyl acetate, followed by extraction. The organic layer was washed with saturated saline and then dried over anhydrous sodium sulfate. After removal of the sodium sulfate by filtration, the layer was concentrated and the resulting crystals were filtrated. The crystals were washed with a small amount of hexane and ethyl acetate and the dried to obtain 0.5 g (yield 77%) of N-[3-cyano-1-(2,6-dichloro-4-trifluoromethylphenyl)pyrazole-5-yl]pyrazine-2-carboxamide.

The synthetic route of 120068-79-3 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; MITSUBISHI CHEMICAL CORPORATION; US2003/60471; (2003); A1;,
Pyrazole – Wikipedia,
Pyrazoles – an overview | ScienceDirect Topics